Analog and Digital Output

Product OverviewThe TC77 is a serially accessible digital temperature sensor designed for low-cost, small-form-factor applications. It outputs temperature data as a 13-bit digital word with SPI and MICROWIRE compatible interfaces. Offering solid-state temperature sensing with high accuracy across a wide operating range, the TC77 features low power consumption in both continuous conversion and shutdown modes, making it ideal for thermal management in various electronic systems

Product OverviewThe MIC384 is a versatile digital thermal supervisor designed to measure local and two remote temperatures. It features a 2-wire SMBus-compatible interface, programmable thermostat settings, and an open-drain interrupt output. Its fault queues and failsafe response to diode faults prevent nuisance tripping and ensure reliable operation. With a wide power supply range and low power shutdown mode, the MIC384 is ideal for demanding thermal management applications

Product OverviewThe MIC384 is a versatile digital thermal supervisor designed for comprehensive temperature monitoring. It features local and two remote temperature measurement capabilities, utilizing its internal sensor and external silicon diodes. With a 2-wire SMBus-compatible interface, programmable thermostat settings, and an open-drain interrupt output, the MIC384 offers robust thermal management solutions for various applications, including computers, power supplies,

TC1047/TC1047A - High Precision Temperature-to-Voltage ConverterThe TC1047 and TC1047A are linear voltage output temperature sensors that provide an output voltage directly proportional to the measured temperature. They offer accurate temperature measurement from -40C to +125C with a linear temperature slope of 10mV/C. The TC1047 operates with a supply voltage range of 2.7V to 4.4V, while the TC1047A supports a wider range of 2.5V to 5.5V. These devices are available in a

Product OverviewThe MIC284 is a versatile digital thermal supervisor designed for CPU thermal supervision in computing applications. It measures both local and remote temperatures using an 8-bit Sigma-Delta ADC and communicates via a 2-wire SMBus-compatible interface. Key features include programmable thermostat settings, open-drain interrupt and overtemperature output pins for fan control or hardware shutdown, interrupt masking, low power shutdown mode, and failsafe response

Product OverviewThe Microchip Technology Inc. MCP9804 is a digital temperature sensor that accurately converts temperatures from -40C to +125C into a digital word with typical accuracy of 0.25C and a maximum of 1C. It features user-programmable registers for flexible temperature sensing applications, including shutdown/low-power modes, temperature alert window limits, and critical output limits. The sensor can output an alert signal when temperature boundaries are exceeded,

Product OverviewThe MIC281 is a digital thermal sensor designed for low-cost and small-size applications, capable of measuring the temperature of a remote PN junction. It is optimized for use with inexpensive commodity transistors or embedded thermal diodes found in CPUs and FPGAs. The device features an I2C and SMBus 2.0-compatible serial interface with voltage-tolerant I/Os and a low power shutdown mode. Its advanced analog front-end and integrating A/D converter provide

Product OverviewThe TC74 is a serially accessible, digital temperature sensor designed for low-cost, small-form-factor applications. It provides temperature data as an 8-bit digital word via a 2-wire SMBus/I2C compatible serial port. Key features include solid-state sensing with high accuracy, a wide supply voltage range, and low power consumption in both operating and standby modes. Its ease of use and small size make it ideal for thermal management in various systems

Product OverviewThe EMC1188 is a high-accuracy, low-cost, 1.8V System Management Bus (SMBus) compatible temperature sensor designed for complex environmental monitoring applications. It features advanced capabilities such as Resistance Error Correction (REC), Beta Compensation to support modern CPU diodes, and automatic diode type detection. The sensor monitors four temperature channels (three external and one internal) with 1C accuracy. A hardware-programmable system

Microchip TCN75A Digital Temperature SensorThe Microchip TCN75A is a digital temperature sensor that converts ambient temperatures to a digital word with high accuracy. It features user-programmable registers for flexible temperature-sensing applications, allowing for user-selectable resolution, power-saving modes (Shutdown and One-shot), and configurable temperature alert and hysteresis limits. The sensor outputs an alert signal when temperature thresholds are crossed, with

Product OverviewThe TC77 is a serially accessible digital temperature sensor designed for low-cost, small-form-factor applications. It outputs temperature as a 13-bit digital word with SPI and MICROWIRE compatible interface. Offering solid-state temperature sensing with high accuracy across a wide operating range, the TC77 features low power consumption in both continuous conversion and shutdown modes. Its small size, low cost, and ease of use make it ideal for thermal

Product OverviewThe AT30TSE752A/754A/758A are highly accurate digital temperature sensors with integrated nonvolatile registers and serial EEPROM. They feature a 2-wire I2C and SMBus compatible serial interface, supporting SMBus Timeout and Alert functions. With selectable addressing, up to eight devices can be connected on the same bus. These sensors offer a wide operating supply voltage range of 1.7V to 5.5V and are compatible with 400kHz and 1MHz communication speeds. They

EMC1812/13/14/15/33 Data SheetThe EMC1812/13/14/15/33 devices are high-accuracy, two-wire (I2C) temperature sensors designed to monitor up to five temperature channels. These devices offer advanced features such as Resistance Error Correction (REC), Beta Compensation, and Rate of Temperature Change measurement with preemptive alerts. These capabilities provide a robust solution for complex environmental monitoring applications, offering flexibility and accuracy for critical

Product OverviewThe Microchip Technology Inc. MCP9800/1/2/3 is a family of digital temperature sensors that convert temperatures ranging from -55C to +125C into a digital word. These sensors offer high accuracy with up to 12-bit resolution and a user-selectable resolution from 9-12 bits. They feature a 2-wire I2C/SMBus compatible interface, low operating current, and power-saving modes like Shutdown and One-shot measurement. The MCP9800/1/2/3 family is suitable for various

Product OverviewThe EMC1413/EMC1414 are high accuracy, low cost, System Management Bus (SMBus) temperature sensors designed for complex environmental monitoring applications. They feature Resistance Error Correction (REC), Beta Compensation for CPU diodes requiring the BJT/transistor model, and automatic diode type detection, ensuring robust performance. The EMC1413 monitors three temperature channels, while the EMC1414 monitors four, both offering 1C accuracy for internal

Product OverviewThe MCP9800/1/2/3 family of digital temperature sensors from Microchip Technology Inc. converts temperatures between -55C and +125C to a digital word with high accuracy. These sensors offer user-selectable resolution from 9 to 12 bits, a wide operating voltage range of 2.7V to 5.5V, and a 2-wire I2C/SMBus compatible interface. Key features include low operating current (200 A typical), ultra-low shutdown current (1 A maximum), and power-saving One-shot

Product OverviewThe AT30TS74 is a complete, precise digital temperature sensor designed for measuring local temperatures in various applications. It integrates a high-precision temperature sensor, programmable temperature alarms, and a 2-Wire I2C/SMBus compatible serial interface. The device offers flexibility through user-programmable registers for configuring sensor performance and alarm responses. It features a shutdown mode for low power consumption and is factory

Product OverviewThe EMC1412 is a high-accuracy, low-cost, System Management Bus (SMBus) temperature sensor designed for robust environmental monitoring. It features advanced capabilities like Resistance Error Correction (REC) and Beta Compensation to accurately measure temperatures from both external and internal diodes, supporting CPU diodes requiring the BJT/transistor model. The device automatically detects external diode types and optimizes sensor settings, eliminating

Product OverviewThe TC74 is a serially accessible, digital temperature sensor designed for low-cost, small-form-factor applications. It provides temperature data as an 8-bit digital word via a 2-wire SMBus/I2C compatible serial port. Key features include solid-state sensing with high accuracy, low power consumption in both operating and standby modes, and a supply voltage range of 2.7V to 5.5V. The TC74 is suitable for thermal protection, monitoring, and thermostat control in

Product OverviewThe TC74 is a serially accessible, digital temperature sensor designed for low-cost and small-form-factor applications. It converts temperature from an onboard sensing element into an 8-bit digital word, accessible via a 2-wire SMBus/I2C compatible serial port. This allows for multi-drop/multi-zone monitoring and features a low-power Standby mode. With a temperature resolution of 1C and a nominal conversion rate of 8 samples/sec, the TC74 is ideal for thermal