Pressure Measurement Instruments‌

PR 5437D 2-Wire HART 7 Temperature Transmitter Product Overview Advanced 2-wire HART 7 temperature transmitter supporting RTD, TC, potentiometer, linear resistance, and bipolar mV inputs. Features single or true dual inputs with sensor redundancy and drift detection capabilities. Environmental Conditions Operating temperature -50°C to +85°C (standard) -40°C to +80°C (SIL) Storage temperature -50°C to +85°C Calibration temperature 23...25°C Relative humidity < 99% RH (non

1. Product Overview NEW-FLOW ETS3000X explosion-proof temperature switch adopts gas/liquid filled thermal expansion sensing principle, matched with remote stainless steel capillary for long-distance temperature detection. Die-cast aluminum explosion-proof enclosure meets international hazardous area standards, NEMA4X & IP65 waterproof dustproof. Built-in pure silver SPDT microswitch provides stable on-off signal for temperature alarm, pump/valve interlock, furnace overheat

The L200-A radar water level gauge is a dedicated non-contact radar level sensor for open water and industrial water tanks. Adopting FMCW frequency modulation continuous wave radar principle, it does not contact measured water, free from sediment, sludge, temperature and humidity interference. Equipped with intelligent wave filtering algorithm to eliminate water surface fluctuation error, IP68 fully sealed housing for outdoor long-term unattended operation, widely used in

Product Overview NEW-CONSENS LUGB sanitary vortex flowmeter works on Karman vortex street principle, specially developed for sanitary production lines. The whole wetted part adopts SS316L stainless steel, matched with quick sanitary clamp connection, easy to disassemble and CIP/SIP cleaning. This vortex meter accurately measures flow rate of liquid, gas and saturated steam. No moving parts inside the tube, low wear and long service life. Built-in intelligent converter with

IntelliCAL LDO101 Laboratory Luminescent/Optical Dissolved Oxygen Sensor The IntelliCAL LDO101 is a premium digital dissolved oxygen sensor utilizing advanced luminescent (optical) technology. With no membrane or electrolyte requirements, this sensor offers reliable, maintenance-free DO measurements for laboratory and field applications. Product Overview Specification Details Model Name LDO101 Full Name IntelliCAL Luminescent Dissolved Oxygen (LDO) Sensor Measurement

Product Overview Item Specification Model Number 5811200 Product Name IntelliCAL LDO Replacement Sensor Cap with iButton Description Replacement luminescent DO cap for LDO101 optical dissolved oxygen probes Measurement Principle Luminescent quenching (optical DO, no membrane, no electrolyte) Compatible Probes LDO101 (Lab & Field versions) Compatible Meters HQ2100, HQ2200, HQ4100, HQ4200, HQ4300; SC100, SC200, SC1000 Key Components Item Specification Contents Replacement LDO

Ashcroft T5400 All Stainless Steel Process Gauge The T5400 all stainless steel pressure gauge complies with GB/T1226 and EN837-1 standards and is suitable for monitoring and controlling processes and equipment. T5400 offers a dial with excellent visibility and robust construction for industrial applications. Performance Specifications Accuracy Class 1.6 Standards EN837-1, GB/T1226 Pressure Range Vacuum, compound, 0 to 400 bar (psi, KPa, MPa, kg/cm² and other units available)

Product Features High precision Good stability Two-wire system (special four-wire system available) Solid components, plug-in printed circuit boards Strong and vibration-resistant Continuous external adjustment of range and zero point Forward migration up to 500%; Negative migration up to 600% Intelligent range ratio 15:1 Adjustable damping Good unidirectional overload protection No mechanical moving parts, reducing maintenance workload Unified structure across the entire

Product Features High precision Good stability Two-wire system (special four-wire system available) Solid components, plug-in printed circuit boards Strong and vibration-resistant Continuous external adjustment of range and zero point Forward migration up to 500%; Negative migration up to 600% Intelligent range ratio 15:1 Adjustable damping Good unidirectional overload protection No mechanical moving parts, reducing maintenance workload Unified structure across the entire

Small size, light weight: only one-third the volume of a capacitive transmitter and one-fifth of a capacitive pressure transmitter; High precision and good stability: a stable and reliable silicon piezoresistive chip; Reliable circuit and fast response speed; Advanced diaphragm technology: Utilizes advanced diaphragm/oil-filled isolation technology, with minimal oil filling to ensure excellent pressure transfer performance; Smart interface, easy to expand: The smart model can

Product Features Small size and light weight: The volume is only 1/3 of the capacitive transmitter, and the weight is 1/5 of the capacitive pressure transmitter; High precision and good stability: stable and reliable silicon piezoresistive chip; The circuit is reliable and the response speed is fast; Advanced diaphragm technology: It adopts advanced diaphragm/oil-filling isolation technology, and the oil filling volume is extremely small to ensure good pressure Force

The central sensing unit adopts high-precision silicon technology, accurate to ±0.05% (up to ±0.025%) Double overload protection diaphragm design, single-phase overpressure can reach 42MPa Static pressure error can reach ±0.05%/10MPa Temperature performance is within ±0.04%/10k, and the temperature effect is small. Range ratio adjustment is 100:1, with wider adaptability. The structure is more compact and fully molded. The electronic unit adopts the patch process; The circuit

1. Dynamic three-diaphragm anti-overload structure can measure extremely low differential pressure under very high static pressure 2. Using HART communication protocol, it can be configured with most of the field 3. Under complex and harsh working conditions, the installation methods are diverse and reasonable 4. No mechanical moving parts, less maintenance work, adjustable damping 5. Optional high static pressure 42Mpa. Micro differential pressure 1KPa 6. The zero point

The S600N is the most cost-effective process control-level pressure transmitter, a crystallization of precision machining + temperature compensation + signal processing technology. It can be installed directly at the measurement point, eliminating the need for pressure extraction pipes and other auxiliary valve parts, thereby reducing on-site installation costs. By applying digital technology, communication between on-site instruments and control systems is established,

AF1800 integrated temperature and pressure transmitter uses high-quality and highly stable pressure-sensitive and temperature-sensing components, which are converted into standard RS485 signal output through signal conditioning circuits, enabling accurate measurement of both dielectric pressure and temperature. Item Details Accuracy Pressure (Standard Grade): ±0.5%FSTemperature: ±1°C Measuring Range Pressure ChannelGauge Pressure: -100kPa ~ 0 ~ 2kPa ~ 100MPaAbsolute Pressure:

AC Clamp Meter 3280-10F Basic Parameters Accuracy guaranteed for 1 year, adjusted accuracy guaranteed for 1 year Parameter Specifications Alternating Current 41.99~1000 A, 3 ranges (50~60 Hz, average value)Basic accuracy: ±1.5 % rdg. ±5 dgt. DC Voltage 419.9 m~600 V, 5 rangesBasic accuracy: ±1.0 % rdg. ±3 dgt. AC Voltage 4.199~600 V, 4 ranges (45~500 Hz, average value)Basic accuracy: ±1.8 % rdg. ±7 dgt. Crest Factor -- Resistance 419.9 Ω~41.99 MΩ, 6 measuring rangesBasic

Technical Parameters: Measuring Range: -100KPa～150MPa; Power Supply Voltage: 18～36VDC; Output Signal: 4～20mA (two-wire), 1～5V (three-wire); Load Resistance: ≤ 1000 Ω; Power Consumption: 2mW; Connecting Cable: Shielded cable; Accuracy Class: 0.1, 0.25, 0.5; Medium Temperature: A: -40～85℃, B: -40～125℃; Ambient Temperature: -40～85℃ (above 60℃ requires declaration); Vibration Resistance: ≤ 30HZ/1mm; Overload: 2～3 times.

WINTERS PCC-40 Industrial Pressure Gauge Industrial dual scale pressure gauge with axial 304SS housing, designed for demanding applications requiring high accuracy and durability. Product Specifications ModelWINTERS PCC-40 Series (Industrial Pressure Gauge) TypeIndustrial Dual Scale Pressure Gauge (Dry / Glycerin Filled) Dial Size4" (100 mm) Accuracy (25°C)±1.5% Full Scale (FS) Case MaterialPBT Plastic (Black) Wetted PartsBrass (Standard); 316L Stainless Steel (Optional)

HACH ORP Electrode Z08351=C=0000Z Professional combination pH electrode with built-in Pt100 temperature sensor, designed for demanding industrial water quality monitoring applications. Features a 10-meter fixed cable for reliable installation. Technical Specifications ModelZ08351=C=0000Z BrandPOLYMETRON (HACH) TypeCombination pH electrode with built-in Pt100 temperature sensor Body MaterialPPS (Polyphenylene Sulfide) Cable Length10 meters (fixed cable) Cable TypeCoaxial cable

WINTERS PSQ-40 3A Approved Sanitary Pressure Gauge 63mm radial sanitary liquid filled pressure gauge with 3A approval, designed for demanding food, beverage, and pharmaceutical applications. Product Specifications Model WINTERS PSQ-40 Type Sanitary Liquid Filled Pressure Gauge (3A Approved) Dial Size 4" (100 mm) Accuracy (25°C) ±1.0% of Full Scale (ANSI/ASME Grade 1A) Case Material AISI 304 Stainless Steel (with rear blowout plug) Wetted Parts 316L Stainless Steel (surface