Custom Metal Tank

Custom Metal Hydraulic Oil Tanks for Return Oil Filtration and Equipment Fixing This hydraulic oil tank features a vertical rectangular design with integral welded support feet at the bottom, which keep the tank elevated off the ground and provide stable support. A circular flange mounting point is located on the front for connecting the return oil filter assembly, and the tank is equipped with multiple hydraulic ports to meet fluid circuit connection requirements. The top

Custom Metal Hydraulic Tanks for Fluid Storage in Industrial Equipment This hydraulic oil tank features a standard rectangular design with a compact overall layout, making it suitable for fixed installation inside equipment. The sides of the tank are designed with extended mounting flanges and pre-drilled mounting holes to facilitate secure attachment to the equipment frame. The top is equipped with a large square flange mounting area that integrates threaded connections to

Custom Hydraulic Metal Tanks for Construction Machinery Hydraulic Systems This hydraulic oil tank features a non-standard, irregularly shaped design. It is formed through a combination of stepped and multi-sloped surfaces tailored to the internal space of the equipment, allowing the tank to fit into complex installation areas. The top incorporates multiple threaded ports for refueling, venting, and the installation of liquid level detection components; the middle section

Custom Metal Hydraulic Tanks for Stable Control of the Return Oil Circulation This hydraulic reservoir is used for fluid storage, return flow buffering, and circulation management in hydraulic systems. It stabilizes fluid supply and maintains pressure balance between the hydraulic pump and the actuators. Through its independent fluid storage chamber design, it facilitates sedimentation of return fluid, air bubble release, and stable fluid circulation during system operation,

Custom Metal Tank Cooling Water Tanks for Pressure Regulation in Cooling Systems This coolant expansion tank is used for volume regulation and pressure buffering in the engine cooling system. By providing a separate storage space, it compensates for dynamic volume changes in the coolant under varying temperature conditions. During engine operation, the coolant expands due to heat and is temporarily stored in the expansion tank; as the temperature drops, it flows back into the

Custom Metal Tank Coolant Expansion Tanks for Engine Cooling Circuits This aluminum coolant expansion tank is used for thermal expansion volume compensation and pressure balance management in the engine cooling system. By providing a separate fluid reservoir, it enables stable volume regulation of the coolant under varying temperature conditions. Compared to the original plastic design, this one-piece aluminum alloy construction offers higher temperature resistance and

Custom Metal Tank Oil Reservoirs for Hydraulic Power Assist Systems This power steering fluid reservoir is used for fluid storage and pressure stabilization in hydraulic power steering systems. By providing a dedicated fluid reservoir, it ensures a stable fluid supply to the steering system during frequent operations. The reservoir features a square box-type design, offering high structural rigidity and vibration resistance. The front is equipped with a knurled fill cap

Custom Metal Coolant Expansion Tanks for Automotive Cooling Systems This coolant overflow recovery tank is specifically designed for automotive cooling systems to provide overflow protection and fluid recovery under fluctuating pressure conditions, while also facilitating routine coolant top-off maintenance. The front of the product features a large knurled filling cap with a built-in O-ring seal, enhancing sealing reliability and operational stability during the filling

Custom Metal Tank Fuel Tanks for Racing Fuel Supply Buffering This stainless steel fuel buffer tank features a compact pressure vessel design and is used to establish a stable intermediate storage and pressure regulation space within fuel delivery systems. Its internal mechanism balances continuous fuel supply and return flow, ensuring a stable fuel supply under dynamic operating conditions and thereby reducing the impact of fluctuations during fuel delivery. The overall

Custom Air Tank with Handles for Air Supply Applications in Mobile Equipment This air compressor storage tank features a compact, pressure-resistant design that balances portability with basic air storage functionality, making it ideal for air compression systems requiring flexible mobility or temporary air supply. The product's structural design emphasizes a balance between lightweight construction and stability, enabling it to meet basic air storage needs while offering

Custom Metal Tanks Filter Housings for Industrial Liquid Filtration Systems This bag filter housing features a vertical cylindrical design and consists of a filter cylinder, a quick-opening top cover, inlet and outlet connections, a bottom drain port, and support legs. The top features a removable cover designed with locking components and lifting eyes to enable quick opening and closing, facilitating the installation and replacement of internal filter bags as well as

Custom Metal Horizontal Air Receiver Tanks for Automated Equipment Air Supply This horizontal air receiver is designed as a cylindrical pressure vessel, consisting of the tank body, end caps at both ends, a top connection port, and side inlet and outlet ports. A threaded connection port is provided at the top of the air receiver for installing pressure gauges, safety devices, or other auxiliary components; gas inlet and outlet connection pipes are located on the sides to

Custom Metal Conical Storage Tanks for Industrial Material Storage This storage bin features a combination of a cylindrical body and a conical base. The unit consists of a storage cylinder, a conical discharge port, a manual butterfly valve, and a mobile support frame. The upper cylindrical section provides a stable storage space, while the lower conical discharge design helps direct the material toward the outlet, improving discharge efficiency. A manual butterfly valve is

Custom Vertical Storage Metal Tanks for Industrial Liquid Storage This vertical storage tank features a cylindrical vertical design and consists of a tank body, top head, bottom support structure, and connection components. The tank body is fabricated from welded stainless steel, offering a high-quality metallic finish and excellent structural stability. The top is equipped with a manhole and various connection ports to facilitate material loading, equipment connection, and

Custom Metal Tanks Filter Housings for Water Treatment Equipment Installation The housing of this bag filter features an all-vertical cylindrical design, consisting of a filter cylinder, top cover, flanged connections, and a support structure. The housing is equipped with standard flanged inlet and outlet connections for easy installation and connection to piping systems. A vent/pressure relief valve port is located at the top, which can be used to release air and regulate

Custom Metal Tank Shell-and-Tube Heat Exchangers for Heating and Cooling Liquids This shell-and-tube heat exchanger features a cylindrical shell structure with flanged end caps at both ends, creating a stable heat transfer channel inside. The exterior of the unit is equipped with multiple pipe connection ports, and pipe connections and disassembly are facilitated through a flanged design. The entire unit employs a welded and assembled metal construction, with a smooth surface

China Custom Metal Air Tanks for Gas Storage and Supply Systems This air receiver features a horizontal cylindrical design with curved heads at both ends. The entire unit is formed through welding, providing a stable pressure-bearing structure. The receiver is equipped with multiple inlet and outlet ports, allowing for the connection of valves, piping, and other pneumatic components as required by the system. Support feet are installed at the bottom to facilitate secure

Custom Metal Agitation Tanks for Chemical Material Mixing Systems This stainless steel mixing and storage tank features a vertical cylindrical design and is manufactured using sheet metal forming and welding processes, ensuring excellent overall structural stability. The tank is equipped with multiple connection ports on the top and sides, allowing for flexible piping configurations to meet the requirements of various equipment systems. A discharge area is provided at the

Custom Metal Fuel Tank Housings for Construction Machinery Equipment This fuel tank is manufactured using custom sheet metal fabrication techniques. It features an elongated, rectangular tank structure that combines bending and welding processes to create a stable fuel storage compartment. Mounting brackets are installed on both sides of the tank to facilitate assembly with the equipment frame; fuel connection ports are provided on the sides and can be adjusted according to

Custom Metal Hydraulic Tank Housings for Hydraulic System Integration The housing of this hydraulic oil tank features a custom sheet metal design. The top of the tank integrates an access hatch, piping connections, and mounting areas, facilitating the connection of hydraulic components and future maintenance. The entire unit is fabricated from welded sheet metal, resulting in a compact structure with a smooth surface; the layout of the connections can be adjusted to