Aeronautical Obstruction Light

Flashing Aviation Obstruction Light Long life LED Medium - intensity Light Medium Intensity Type B Aviation Obstruction Light is a Red flashing obstruction light. For high rise buildings or structures with height between 45 to 105 meters, this Medium Intensity Type B Aviation Obstruction Light could be used solely or together with low intensity aviation obstruction light to play an aviation warning role there. Also, it could be used together with medium intensity type A

SUS304 stainless steel High-intensity LED Aviation Obstruction Light Advantage: 1. Strong efficiency transmission. 2. High-quality Xenon Lamp with 108times long lamp life, low cost and low power consumption. 3. “Safe plug” lamp holder for easy lamp replacement. 4. The circuit of the light has surge protection whose lightning proof ability is In 7.5KA/5 times, IMAX 15KA so that the light is suitable to harsh environment. 5. Uses AH special technology for the ignition of xenon

This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Compliance: **ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Low Intensity Type A / B Obstruction Light ** FAA L-810 Electrical  LED as light source saving power consumption and maintenance,95% less power than equivalent incandescent light  Power supply available in DC(12-48VDC) or AC(110-240VAC) Physical  Bird

This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Compliance ** ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Low Intensity Type A / B Obstruction Light ** FAA L-810 ** LED as light source saving power consumption and maintenance,95% less power than equivalent incandescent light ** Power supply available in DC(12-48VDC) or AC(110-240VAC) ** Bird deterrent spike on top *

Double Led Aviation Obstruction Light for High Structures and Towers Applications This series of products can be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV),High Pole, Tower Crane, Wind Turbine, etc whose height is lower than 45m.When obstacle object is higher than 45m, this series of products can be used with Medium-intensity or high-intensity obstruction light to potentially hazardous obstructions to air

Low-intensity L810 Single Aviation Obstruction Light for High Chimney Single Aviation Obstruction Light Aviation light compliant with ICAO,FAA,CAAC. HOT SALE! Promotion! Datasheet: AH-LI-B Low-intensity L810 Single Aviation Obstruc... Applications This series of products can be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV),High Pole, Tower Crane, Wind Turbine, etc whose height is lower than 45m.When obstacle

Single LED Aviation Obstruction Light Steady Burning Flashing Adjustable Single Aviation Obstruction Light Aviation light compliant with ICAO,FAA,CAAC Datasheeet: AH-LI-B Low-intensity L810 Single Aviation Obstruc... Applications This series of products can be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV),High Pole, Tower Crane, Wind Turbine, etc whose height is lower than 45m.When obstacle object is higher than

E27 LED Low-intensity L810 Single Aviation Obstruction Light for Towers This E27 LED Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. E27 Bulb could be found anywhere in whole world, so it could be simply replaced once bulb is broken. Compliance ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Low Intensity Type A / B Obstruction Light FAA L-810 SPECIFICATIONS AH-LI/BE E27 Low

Medium Intensity ICAO FAA L-864 Aeronautical Obstruction Light Led For Chimney And Tower Product Application This Medium-intensity Type B Aviation Obstruction Light flashing red color, designed for marking top of obstacle which height is between 45 to 105 meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed lens converging light to very small vertical divergence 3° make it totally compliance

AH-HI/A-1 LED Aviation Obstruction Light High-intensity Type A for High Chimney Product Application High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV),High Pole,Tower Crane, Wind Tubinebridge.large-scale port machinery,large engineer machinery and wind turbines. Datasheet: AH-HI-A-1 High-intensity Type A L856 Aviation Obst... Packaging & Delivery Packaging: Plastic bag with paper carton. Delivery: In 2-30 days after payment. After-sales service 1.

Television Tower Obstruction Lighting / Aviation LED Lights Aluminum Alloy AH-LI/B is typically a standard LED Obstruction light designed for marking any obstacle that may present hazards to aircraft navigation. It made of die-cast aluminum alloy housing with polycarbonate dome and complies with ICAO regulation, low intensity type. Product Application Communication Towers Factory Power Plant Chimneys Television Tower Port etc. Datasheet: AH-LI-B Low-intensity L810 Single

This Low-intensity Double light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Main-standby mode ensure the obstacle is always marked even one light fail. Main lamp and spare lamp dual lamp design to ensure building safety. Product Standard: ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Low Intensity Type A / B Obstruction Light FAA L-810 Electrical LED as light source saving power

This Low-intensity Double light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height.Main-standby mode ensure the obstacle is always marked even one light fail. Compliance ** ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Low Intensity Type A / B Obstruction Light ** FAA L-810 Electrical * LED as light source saving power consumption and maintenance,95% less power than equivalent incandescent light

This E27 LED Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height.E27 Bulb could be found anywhere in whole world, so it could be simply replaced once bulb is broken. Compliance ** ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Low Intensity Type A / B Obstruction Light ** FAA L-810 ** LED as light source saving power consumption and maintenance, 95% less power than equivalent

AH-LI/D Low-intensity Double Aviation Obstruction Light Double Aviation light Twin Obstruction light Low intensity light compliant with ICAO,FAA,CAAC Applications This series of products can be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV),High Pole, Tower Crane, Wind Turbine, etc whose height is lower than 45m.When obstacle object is higher than 45m, this series of products can be used with Medium-intensity or

E27 LED Low-intensity L810 Single Aviation Obstruction Light for High Buildings This E27 LED Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. E27 Bulb could be found anywhere in whole world, so it could be simply replaced once bulb is broken. Compliance ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Low Intensity Type A / B Obstruction Light FAA L-810 SPECIFICATIONS AH-LI/BE

FAA Type L-810 Red LED Steady-burning Low Intensity Obstruction Light Compliances FAA AC 150/5345-43 (current edition) Engineering Brief 67D ETL Certified ICAO (Annex 14 - Fourth Edition, July 2004) Product Application This Low-intensity light is a steady burning aviation obstruction light,this fixture is used to mark any obstacle that may present hazards to aircraft navigation. Product Descripton SPECIFICATIONS AH-LI/B Low-intensity Single Aviation Obstruction Light Light

AC220V Double LED Aviation Obstruction Light With Low - Intensity Type Low-intensity Double Aviation Obstruction , Base with high intensity aviation aluminum casting, Fully sealed structure; Light source adopt with independent research and development dedicated LED chip, which have the specific of low power consumption and long long life; Lampshade adopt with PC material, it can resist corrosion, anti-UV, anti-shock; management circuit with Strong lightning protection and

This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Compliance ** ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Low Intensity Type A / B Obstruction Light ** FAA L-810 ** LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light ** Power supply available in DC(12-48VDC) or AC(110-240VAC) Physical  Bird deterrent spike

Medium-intensity Type B L864 Double Aviation Obstruction Light This Medium-intensity Type B Aviation Obstruction Light flashing red color, designed for marking top of obstacle which height is between 45 to 105 meters. Main-standby mode ensure the obstacle is always marked even one light fail. Because when main top main lamp fail, down standby lamp will turn on automatically. Compliance ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Medium Intensity Type B Obstruction