LED Aviation Obstruction Light

Specification Low intensity LED Solar Powered Aviation Light Aviation light Solar Aviation Light Aviation Obstruction light Solar Powered Aviation Light HOT SALE! Promotion! Applications AH-LS/L Low-intensity Solar Powered Aviation Light can be provided with power supply without power transmission cables by solar power, so it is suitable for those locations, Electric Tower, High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane

ICAO High Intensity LED Aviation Obstruction Light 200000cd / 20000cd / 2000cd White Color This High intensity Aviation Obstruction Light is a new generation that is environmental-friendly and has super long life expectancy, which consisted of fresnel lens, a lamp holder, a Microcomputer Controller, high intensity LED and photo-sensor system. Certifications Anhang Technology is a speciallized enterprise focusing on reseach, production, sales and after_x0002_sales service of

Product Introduction This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Compliance ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A / B / E Obstacle Light FAA L-810 CAAC MH6012-2015 Aviation obstruction light, MH 5001—2013 Aerodrome technical standards Electrical 3 high power CREE LED, make sure LED keep bright while use Power supply in DC(48V)& AC

LED Medium-intensity Aviation Obstruction Light/CREE high intensity LED/White/Aviation Navigation Light Product Specifications Attribute Value Light Source CREE high intensity LED Available Colors White Flash Characteristics 20-60FPM - Type A (factory setting: 20FPM) Operation Mode 24hours operation, 2 different modes LED Life Experience (hours) >100,000 Intensity (cd) ≥2000cd (Night), ≥20000cd (Daytime) Product Description This LED Medium-intensity Aviation Obstruction Light

Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption. This LED Medium-intensity Aviation Obstruction Light emitting red color, designed for marking top of obstacle which height is more than 45meters. Compliance ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium Intensity

Low intensity L810 Solar obstacle aviation obstruction light ANNHUNG Manufacturer Aviation Obstruction Light Solar Aviation Light Obstruction Aviation Light Aviation Warning Light Compliant with ICAO,FAA,CAAC Applications Scope of Application AH-LS-A1 solar low-intensity light is specialized used on the top of the High Chimney,Telecommunication tower, Wind Turbine where there is no cable power supply and those facilities which have high requirements on lightning protection.

High-intensity Type A Aviation Obstruction Light for Exceeding 150 Meters Building Using High-intensity Type A Aviation Obstruction Light High-intensity Aviation Obstruction Light Type A Aviation Obstruction Light Aviation Obstruction Light This High-intensity Type A Aviation Obstruction Light flashing white color 24 hours and designed for marking top of obstacle that exceed 150 meters in height.Ultra high intensity CREE LED is used for the light source ensure light’s long

LED Building Aircraft Aviation Obstruction Light Chimney Warning Light Single Aviation Obstruction Light compliant with ICAO, FAA, and CAAC standards. Download Datasheet: AH-LI-B Low-intensity L810 Single Aviation Obstruction Light Applications This series of products can be used alone on the top of high-rise buildings, chimneys, marking towers (telecom, GSM, microwave & TV), high poles, tower cranes, wind turbines, etc., with heights lower than 45m. When obstacle height

FAA Type B Warning Lights, Medium Intensity LED Obstruction Light High Pole Safety Light This Medium-intensity Type B L864 Aviation Obstruction Light flashing red color, designed for marking top of obstacle which height is between 45 to 105 meters.Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed lens converging light to very small vertical divergence 3° make it totally compliance with ICAO standard.

LED Aviation Obstruction Light The LED Aviation Obstruction Light is a highly reliable and efficient obstacle marking light designed to ensure maximum visibility and safety for various structures including towers, buildings, wind turbines, and other tall obstacles. Engineered to meet stringent aviation safety standards, this light is essential for preventing collisions by alerting pilots and aircraft operators of potential hazards during nighttime or low-visibility conditions

Specification Medium-intensity Type B Aviation Obstruction Light Aviation Light Aviation Obstruction Light Aviation Light Obstruction Light Aviation Warning Light compliant with ICAO,FAA,CAAC Applications Scope of Application This series of products can be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV),High Pole, Tower Crane, Wind Turbine, etc whose height is between 45m and 105m.When obstacle object is higher than

This LED Medium-intensity Aviation Obstruction Light emitting red color, designed for marking top of obstacle which height is more than 45meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption. Compliance ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium Intensity

Ultra High Intensity Solar Aviation Obstruction Light FAA Type B Aircraft Warning System This FAA L864 Type B Solar powered LED Aviation Obstruction Light flashing red color, designed for marking top of obstacle which height is between 45 to 105 meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed lens converging light to very small vertical divergence 3° make it totally compliance with ICAO

AH-MI-B2 LED Medium-intensity Aviation Obstruction Light Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption. Compliance ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium Intensity Type B / C Obstruction Light CAAC MH6012-2015 Aviation obstruction light, MH 5001—2013

2000cd Medium Intensity LED Aviation Obstruction Light Integrated Circuit Protection This ICAO Aviation Obstruction Type B L864 warning light flashing red color, other color is optional designed for marking top of obstacle which height is between 45 to 105 meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed lens converging light to very small vertical divergence 3° make it totally compliance

LED Aviation Obstruction Light 2000cd Red Flashing medium intensity Light ICAO certificed tower chimney warning light This LED Medium-intensity Type B L864 Aviation Obstruction Light flashing red color, designed for marking top of obstacle which height is more than 45meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light

Die Casting Aluminum Airplane Warning Lights Product Overview AH-MI-B2(L) LED Aviation Obstruction Light Medium-intensity Type B is designed for high-rise buildings and structures with heights between 45 to 105 meters. It can be used independently or in combination with low-intensity type lights to provide warning signals. For structures exceeding 105 meters, it can be integrated with medium-intensity type A or high-intensity aviation obstruction lights. The light housing is

LED Aviation Obstruction Light 5 Watt red Obstruction Light , FAA L810 Aircraft Warning Lights On Towers This LED 32cd Low-intensity Aviaion Obstruction Light Double light is a steady burning aviation obstruction light designed for marking top of high obstacle that do not exceed 45 meters in height. Products performance can be customized for different usages. Main-standby mode ensure the high obstacle is always marked even one light fail. It's provide better protection for

Medium Intensity LED Double Aviation Obstruction Light For Building This Medium-intensity Double LED Aviation Obstruction Light emitting red color, designed for marking top of obstacle which height is between 45 to 105 meters. Main-standby mode ensure the obstacle is always marked even one lamp fail. Because when main lamp fail, standby lamp will turn on automatically. Compliance ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium Intensity Type B / C Obstruction

White CREE LED Aviation Obstruction Light Medium Intensity Type A AH-MI-A2 LED Medium-intensity Type A L865 Aviation Obstruction Light This LED Medium-intensity Type A L865 Aviation Obstruction Light flashes white color and is designed for marking the top of obstacles with heights between 105-150 meters. Ultra high intensity CREE LED light source ensures long lifespan and optimal performance. A self-designed reflector converges light, achieving standard light intensity with