Endress+Hauser Flowmeter

FMI51-A2AGEJB1A1A This capacitive level transmitter is an integrated industrial level measuring device adopting advanced capacitance detectionprinciple, supporting continuous and accurate liquid level measurement within 0.1-4m measuring range. It adopts two-wire powersupply and outputs standard 4-20mA signal with HART communication protocol, compatible with most industrial control systems.Equipped with high-quality PTFE anti-corrosion insulation material, it adapts to extreme

TM131-AABBACC1BA7AGAB5AA1AA1 Explosion Proof RTD Temperature Transmitter Threaded Probe Industrial High Temp Temperature Sensor TM131-AABBACC1BA7AGAB5AA1AA1 This industrial flameproof temperature transmitter adopts high-stability RTD platinum resistance sensing element, designed for high temperature and hazardous industrial working conditions. It features integrated signal conversion structure to output accurate and consistent temperature signals. specification parameter 1.

9W4BA2-AALHGNDAAAACAFA2 This integrated pipe-type ultrasonic flow meter adopts advanced ultrasonic time difference measurement technology, featuringintegrated compact structure and pipe inline installation without later debugging. It supports wide measuring range of DN15-DN5000 pipe diameter and 0.01-12m/s flow velocity with measuring accuracy up to ±0.5%. Equipped with standard 4-20mA analog output and RS485 digital communication interface, it supports real-time data

93TA1-CCBEAA+P1 This 93TA1-CCBEAA+P1 portable clamp-on ultrasonic flow meter is equipped with professional P1 high temperature resistant probe, adopting advanced non-invasive ultrasonic measuring principle. It requires no pipe cutting or system shutdown, realizing faston-site installation and detection. It supports ultra-wide measuring range of DN15-DN4000 pipe diameter and 0-15m/s flow velocity,adapting to medium temperature from -40℃ to +170℃. specification parameter 1.

9P5BA2-BSIBAAAFBAAAEEAAABA2 This integrated ultrasonic flow meter adopts advanced ultrasonic wave sensing technology with compact and integrated structuraldesign. It features high measurement accuracy up to ±0.5% and ultra-wide measuring range, supporting pipe diameters from DN15 to DN6000 and flow velocity of 0.01m/s to 12m/s. Compatible with various uniform liquid media including water and oil, the device is equipped with 4-20mA analog output and RS485 communication for

9W4BA0-AALHFPDADAABACA2 This non-invasive clamp-on ultrasonic flow meter adopts advanced time-difference ultrasonic measuring principle, requiring no pipe cutting, no pipeline damage and no production shutdown during installation. It supports ultra-wide measuring range with pipediameter from DN15 to DN5000 and flow velocity of 0.01m/s to 12m/s, achieving stable measuring accuracy up to ±0.5%. Equipped with standard 4-20mA analog output and RS485 communication interface, it

9P5BA2-AAIBAAAFBAAACCBAAFA2 This integrated ultrasonic flow meter adopts advanced ultrasonic measurement principle with integrated structural design,featuring simple installation and no need for pipe cutting or pipeline reconstruction. It supports ultra-wide measuring pipe rangefrom DN15 to DN6000 and flow velocity range of 0.01m/s to 12m/s, suitable for various homogeneous liquid media such as water andoil. specification parameter 1. 9P5BA2-AAIBAAAFBAAACCBAAFA2 2. Measuring

Products Description TMT82-BAA2AB1A1AAA1+F1LAThis head-mounted temperature converter accepts dual thermal sensor signals and outputs 4-20mA with digital protocol. It supports automatic fault diagnosis and equips a local display, with sealed metal shell and explosion-proof qualification for long-term temperature monitoring in chemical pipelines. Specification Parameters1.Dual universal RTD & thermocouple input 2.4-20mA+HART two-wire signal output 3.Loop power supply 11.5–42VDC

5WBB25-AADAEBJM0AUD210AA1 This integrated intelligent electromagnetic flowmeter adopts advanced electromagnetic induction principle with no internal movingparts and low pressure loss ensuring stable and long-term operation. It supports ultra-wide flow measurement range from 0.5 to263000m³/h suitable for conductive liquids such as clean water sewage and slightly corrosive industrial fluids. Equipped withstandard 4-20mA analog output and HART digital communication it is fully

5W4C25-AADLHP2AQD210A+AA This integrated intelligent electromagnetic flowmeter adopts electromagnetic induction principle. Without internal moving parts,it brings low pressure loss and stable long-term operation. The measuring range covers 0.4–1050m³/h, suitable for clean watersewage and weakly corrosive conductive fluids. Equipped with 4-20mA analog output and HART communication protocol, it matches most industrial control systems. Built-in local LCD display and anti

Products Description 7D2C50-AAACCAAAABDESMA1+AKThis submersible water quality probe tracks dissolved oxygen levels in liquid medium continuously. It supports digital signaltransmission and built-in temperature compensation, with anti-corrosion structure and deep waterproof design for long-term online monitoring of sewage, aquaculture and surface water. Specification Parameters1.Dissolved oxygen measuring principle 2.RS485 Modbus digital signal output 3.Operating temperature

FTW23-AA4NW5J Capacitive Level Switch PNP Normally Open/Normally Closed 5-meter Fixed Cable G1/2 Thread in Stock FTW23-AA4NW5J FTW23-AA4NW5J is a German original E+H Liquipoint series capacitive level switch. It is equipped with G1/2 external thread for installation. The probe is made of PEEK material and the housing is made of 316 stainless steel. It comes with a standard 5-meter fixed cable for output. Complies with food hygiene standards and supports CIP/SIP high

FTW23-AA4MW5J Capacitance Point Level Switch PNP NO NC Output G1/2 Thread M12 Connector in Stock FTW23-AA4MW5J FTW23-AA4MW5J is iquipoint capacitive level switch. AA indicates G1/2 external thread installation, and MW5J represents M12 four-pin aviation connector wiring (distinguishing W5J which is fixed with a 5-meter cable). The probe end uses food-grade PEEK, and the entire machine body is made of 316L stainless steel, with sanitary-grade EPDM sealing. specification

FMU30-AAHEABGHF Integrated Ultrasonic Level Meter 4-20mA Two-wire 8m Liquid 3.5m Solid Measuring Range 0.8W Low Power FMU30-AAHEABGHF This integrated ultrasonic level measuring instrument is a high-precision industrial measuring device. Adopting ultrasonic echo detection principle with non-contact measurement design, it avoids medium abrasion and blockage, suitable for continuous level monitoring of liquids, pastes and granular solids. It supports 8m maximum measuring range

Vibrating Rod Solid Level Switch FTM20-4G25A DPDT Relay Output Wide Voltage 316SS Probe Powder Granule Silo High Low Material FTM20-4G25A FTM20-4G25A vibrating rod level sensor is used for high and low limit detection of powder and granular bulk solids in silos and hoppers. The measuring rod is made of 316 stainless steel with strong wear resistance and anti-caking performance. Reinforced polyester housing reaches IP67 protection grade, adapting to heavy dust industrial

Flush Mount Hygienic Conductive Level Sensor FTW33-AA4NW5J IO-Link PNP 10-30VDC Stainless Steel Liquid Point Switch FTW33-AA4NW5J FTW33-AA4NW5J is a compact flush hygienic conductive point level sensor for conductive liquid and viscous medium high-low limit monitoring and pump dry run protection. Wetted parts adopt 316L stainless steel and food grade PEEK insulation, comply with international hygienic standards and support CIP cleaning and short time SIP high temperature

Sanitary Capacitance Point Level Sensor FTW23-AA4MW5J IO-Link PNP 10-30VDC Stainless Steel Liquid Level Switch FTW23-AA4MW5J FTW23-AA4MW5J is a sanitary capacitance point level transmitter for liquid high and low limit alarm. Wetted parts adopt 316L stainless steel and food-grade PEEK material, conforming to FDA and EHEDG sanitary standards, supporting CIP cleaning and short-time SIP sterilization at 135℃. Continuous medium temperature range is -20℃ to 100℃ with maximum

New & Original TMT71-AAA2AAAA1+F1 ITEMP TMT71 Temperature Transmitter Good Price Products Description TMT71-AAA2AAAA1+F1 This DIN rail temperature converter accepts multiple sensor signals and converts them to standard analog current output. It supports wireless parameter setup, built-in isolation circuit, compact narrow design for cabinet mounting, suited for general industrial temperature measurement pipelines. Specification Parameters 1.Output signal: 4–20mA 2.Power supply

TM411-AA2AG1L3CB2C1A40Q1A000A3A1C43CR1A1A1+C1PASB Digital Analog Signal Transmitter High Power Wide Measuring Range 4-20mA TM411-AA2AG1L3CB2C1A40Q1A000A3A1C43CR1A1A1+C1PASB This DIN rail mounted digital signal transmitter is equipped with high-power drive circuit and ultra-wide measuring range supporting customized calibration on site. The device is compatible with multiple sensor inputs including voltage current RTD and thermocouple and outputs universal industrial 4-20mA

TM401-AA1C1D2A13A70A22CA1A1+JA This hygienic clamp temperature measuring unit adopts food-grade polished stainless steel structure without sanitary dead angles,equipped with high-precision RTD sensing element and JA local digital display module for on-site real-time temperature reading andfault diagnosis.It supports wide voltage power supply of 8.5~36VDC, stable under unstable industrial power supply environment. The measuringtemperature range covers -50℃ to 200℃, matching