Holybro Brand

Product Description The Pixhawk® 6C Mini is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6COpen Standard and Connector Standard. It shares the same STMH743 microprocessor and sensors as the Pixhawk® 6C. Compared to thestandard Pixhawk® 6C, this Mini version has a built-in PWM header, and some ports have been removed in order to fit this Mini formfactor.Inside the Pixhawk® 6C Mini, you can find an STMicroelectronics®

Specification Description:This PM07 Power Module supplies clean 5.2V to flight controller from the battery and provides current consumption and batteryvoltage measurements via analog signal through a 6 Pin JST-GH cable, along with integrated esc power & signal distribution for upto 8 ESCs. It is designed specifically for flight controller that do not have built-in servo header pins like the Pixhawk 6C &Pixhawk 4. It comes with pre-soldered wires, capacitor, and XT60 connector

Product Description Feature * Supports 2-14S & 200A Cont, 400A Burst * DroneCAN Communication Protocol * Small & Compact Design * Two 5V Output with Independent BEC IC and Circuitry * Separated Sensor and BEC Board to Minimize Electrical Noise Interference * Galvanically Isolated Current Sensor IC (AEC-Q100 Grade 1 qualified) * High Accuracy Temperature Sensor for Temperature Monitor * High-Efficiency Aluminum Heat Dissipation Shell Specifications * Processor:STM32F405RG

Product Description Feature* Integrated Optical Flow and Rangefinder Module* PixArt Optical Flow Sensor for Accurate Motion Tracking* Broadcom ToF Sensor for Precise Distance Measurement* Infrared LED for Optical Low-Light Performance* DroneCAN ProtocolSpecification* PixArt PAA3905E1 Optical Flow Sensor * Tracks under low light conditions of >5 lux* Effective Viewing angle up to 42°* Wide working ranges from 80mm up to 30m * Up to 7.4 rad/s* 40mW IR LED built onto the board

Product DescriptionHolybro H-Flow with DroneCAN Protocol Integrated Optical Flow and Rangefinder ModuleThe Holybro H-Flow is a compact optical flow and distance sensor module that combines a PixArt PAA3905E1 optical flow sensor, a Broadcom AFBR-S50LV85D distance sensor, and an InvenSense ICM-42688-P 6-axis IMU. This all-in-one design simplifies installation, while the onboard infrared LED enhances visibility in low-light conditions.The H-Flow features a Pixhawk-standard 4-pin

Product DescriptionSpecificationitemvalueplace of originguangdongbrand nameFor FPVcompatible brandFor FPVprivate moldYesMaterialAluminumSelling Point1.The Holybro Pixhawk 4 FC Only PM07 12S 14S PM02 12S M9N M10 GPS Set is a state-of-the-art flight control system designed for unmanned aerial vehicles (UAVs).2.Engineered with private mold technology, this product boasts improved performance, stability, and efficiency.3.Made in China (CN;HUB), the Pixhawk brand is synonymous

Product descriptions from the supplierWarning/Disclaimer This product has acquired the relevant product qualification(s)/license(s) of certain applicable country/countries.View moreace of OriginChinaBrand NameHolybrobrand nameHolybroModel nameH-FlowNet Weight15.2gSuitable forFPV DRONE UAV We have a full range of DJI agricultural droneaccessories at extremely cheap wholesale prices.Consultations are very we

The Holybro H-Flow is a compact optical flow and distance sensor module that combines a PixArt PAA3905E1 optical flow sensor, a Broadcom AFBR-S50LV85D distance sensor, and an InvenSense ICM-42688-P 6-axis IMU. This all-in-one design simplifies installation, while the onboard infrared LED enhances visibility in low-light conditions.The H-Flow features a Pixhawk-standard 4-pin CAN connector, ensuring seamless integration with Pixhawk-compatible controllers via the CAN port.

Product ModelH-RTK NEO-F9P w/ Helical AntennaH-RTK NEO-F9P w/ Vertical Array Patch AntennaH-RTK NEO-F9P w/ Base Station AntennaRecommended Application• Rover Station (UAV, Marine, Land Vehicle, etc)• Rover Station (UAV, Marine, Land Vehicle, etc)• Base Station• Rover Station (Marine, Land Vehicle, etc)• Base StationGNSS Receiveru-blox NEO-F9Pu-blox NEO-F9Pu-blox NEO-F9PProcessorSTM32G473 (Available in DroneCAN Version Only)N/AIMU & BarometerICM42688 & ICP20100 (Available in

Product Description Specification Product ModelUART 10-Pin (GPS1 Port)UART 6-Pin (GPS2 Port)DroneCAN 4-Pin (CAN Port)SKUSKU12054SKU12058SKU12059Connector TypeGH1.25 10pin cableGH1.25 6pin cableGH1.25 4pin cableApplicable PortsHolybro GPS1 PortHolybro or Cubepilot GPS2 PortPixhawk CAN PortCommunication ProtocolUARTUARTDroneCANMCUIMUBarometerN/AN/A * STM32G4 * ICM42688 * ICP20100MagnetometerHigh precision, Low Noise RM3100 CompassApplicationMoving Station(Aircraft, Ground

Specification item value place of origin China brand name Holybro private mold Yes compatible brand For fpv Material Plastic Company Introduction The company has been deeply involved in the photoelectric camera module industry for many years, and the product range has been continuously enriched and the production scale has continued to expand. The company strictly controls product quality and has passed ISO9001, ISO45001, ISO14001, IATF16949, QC080000, ESD S20.20 and other

Specification item value place of origin China brand name Holybro private mold Yes compatible brand For fpv Material Plastic Company Introduction The company has been deeply involved in the photoelectric camera module industry for many years, and the product range has been continuously enriched and the production scale has continued to expand. The company strictly controls product quality and has passed ISO9001, ISO45001, ISO14001, IATF16949, QC080000, ESD S20.20 and other

SiK Telemetry Radio 100mWSiK Telemetry Radio 500mWSiK Telemetry Radio 1WMax RF Power20 dBm27 dBm30 dBmReceive sensitivity-121 dbm @2kbps RF Data Rate, -105 dbm @64kbps RF Data RateLine-of-sight range300~500m (2dBi Antenna)~ 1km (2dBi Antenna)~ 50km (5dBi Antenna)Antenna Gain2dBi5dBiRF Data Rates2, 4, 8, 16, 32, 64(default), 96, 128, 192, 250 kbpsSerial Interface Data Rate1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6(default), 115.2 kbpsFrequency Band902MHz - 928MHz or 414MHz -

Product Description Specification * Input voltage : 2S-12S * PCB Cont. Current Rating: 60A * PCB Burst Current Rating: 100A (

Product Description Specification item value place of origin guangdong brand name For FPV compatible brand For FPV private mold Yes Material Aluminum Selling Point 1.The Holybro Pixhawk 4 FC Only PM07 12S 14S PM02 12S M9N M10 GPS Set is a state-of-the-art flight control system designed for unmanned aerial vehicles (UAVs). 2.Engineered with private mold technology, this product boasts improved performance, stability, and efficiency. 3.Made in China (CN;HUB), the Pixhawk brand

Product Description Specification item value place of origin China brand name 1 compatible brand For FPV private mold no Material Plastic Selling Point 1.The HolyBro Kakute F4 V2.4 Stack MPU6000 F4 Flight Controller Tekko32 F4 50A /60A/65A 4in1 ESC-Atlatl is a high-performance flight controller and ESC combo designed for RC FPV drones. 2.Leveraging the latest F4 processor, this drone flight controller board offers cutting-edge performance, minutes of flight, and enhanced CPU

Product Description Specification item value place of origin China brand name For FPV compatible brand For FPV private mold YES Material plastic Selling Point 1.High-performance flight controller: The Holybro Pixhawk 6C flight controller is equipped with a powerful STM32H743 processor, providing excellent performance and faster processing time. 2.Advanced IMUs: The flight controller features high-performance, low-noise IMUs on board, which enhances stability and reliability

Product Description Specification item value place of origin China brand name T-MOTOR compatible brand For FPV private mold YES Material Aluminum Alloy Selling Point 1.Customizable Compatibility: The T-MOTOR MINI F45A+MINI F7 20x20mm FPV Stack 3-6S BLHeli_32 4in1 FPV Drones ESC Combo Set is designed to be compatible with a wide range of applications, making it suitable for use in both recreational and commercial drone models. Whether you're a professional aerial photographer

Product DescriptionSpecificationitemvalueplace of originChinabrand nameHolybrocompatible brandFor FPVprivate moldYESMaterialplasticSelling Point1.Compatible with Pixhawk Standard Flight Controllers: The Holybro SiK Telemetry Radio V3 is designed exclusively for Pixhawk standard flight controllers. This easy-to-use and versatile radio has an open-source firmware, offering a wide range of customization options for enthusiasts and professionals alike.2.Open-Source Firmware: The

Product Description Pixhawk 6X (ICM-45686) Warning: Pixhawk 6X flight controllers do not support analog power modules. Key Design Points: * Redundancy: 3x ICM-45686 IMU sensors (±32g) with BalancedGyro™ technology & 2x Barometer sensors * High performance STM32H753 Processor with a clock speed of up to 480 MHz * Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector. * Triple redundancy domains: