Variable Stroke ADVU-80-...-P-A,-100,-125 -S2 -S6 Festo Double-Acting Compact Cylinder
| Item Code | Piston (mm) | Stroke (mm) | Part no. | Type | Item Code | Piston (mm) | Stroke (mm) | Part no. | Type |
| ADVU-80-...-P-A | 80 | 1 ... 400 | 156008 | with female thread | ADVU-80-...-A-P-A | 80 | 1 ... 400 | 156048 | with male thread |
| ADVU-100-...-P-A | 100 | 1 ... 400 | 156009 | with female thread | ADVU-100-...-A-P-A | 100 | 1 ... 400 | 156049 | with male thread |
| ADVU-125-...-P-A | 125 | 1 ... 400 | 175759 | with female thread | ADVU-125-...-A-P-A | 125 | 1 ... 400 | 175771 | with male thread |
| ADVU-80-...-P-A-S2 | 80 | 1 ... 400 | 156018 | with female thread | ADVU-80-...-A-P-A-S2 | 80 | 1 ... 400 | 156058 | with male thread |
| ADVU-100-...-P-A-S2 | 100 | 1 ... 400 | 156019 |
with female thread, Through piston rod |
ADVU-100-...-A-P-A-S2 | 100 | 1 ... 400 | 156059 | with male thread, Through piston rod |
| ADVU-125-...-P-A-S2 | 125 | 1 ... 400 | 175760 | with female thread, Through piston rod | ADVU-125-...-A-P-A-S2 | 125 | 1 ... 400 | 175772 | with male thread, Through piston rod |
| ADVU-80-...-P-A-S6 | 80 | 1 ... 400 | 156038 | with female thread, Through piston rod | ADVU-80-...-A-P-A-S6 | 80 | 1 ... 400 | 156098 | with male thread, Through piston rod |
| ADVU-100-...-P-A-S6 | 100 | 1 ... 400 | 156039 | with female thread, Through piston rod | ADVU-100-...-A-P-A-S6 | 100 | 1 ... 400 | 156099 | with male thread, Through piston rod |
| ADVU-125-...-P-A-S6 | 125 | 1 ... 400 | 175761 | with female thread, 120°C Heat-resistant | ADVU-125-...-A-P-A-S6 | 125 | 1 ... 400 | 175773 | with male thread, 120°C Heat-resistant |
| General technical data | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PistonØ | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | 125 | |
| Pneumatic connection | M5 | M5 | M5 | M5 | G1/8 | G1/8 | G1/8 | G1/8 | G1/8 | G1/4 | G1/4 | |
| Piston rod end | Female thread | M3 | M4 | M5 | M5 | M6 | M6 | M8 | M8 | M10 | M12 | M16 |
| Male thread | M6 | M8 | M10x1.25 | M12x1.25 | M16x1.5 | M20x1.5 | M27x2 | |||||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | |||||||||||
| Note on the operating/pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | |||||||||||
| Design | Piston | |||||||||||
| Piston rod | ||||||||||||
| Cushioning | Elastic cushioning rings/plates at both ends | |||||||||||
| Position sensing | Via proximity switch | |||||||||||
| Type of mounting | With through-hole | – | ||||||||||
| With female thread | ||||||||||||
| With accessories | ||||||||||||
| Mounting position | Any | |||||||||||
| Operating conditions | |||||||||||||
| Piston Ø | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | 125 | ||
| Operating pressure | Piston rod at one end | [MPa] | 0.12 ... 1 | 0.1 ... 1 | 0.08 ... 1 | 0.06 ... 1 | 0.05 ... 1 | ||||||
| [bar] | 1.2 ... 10 | 1 ... 10 | 0.8 ... 10 | 0.6 ... 10 | 0.5 ... 10 | ||||||||
| [psi] | 17.4 ... 145 | 14.5 ... 145 | 11.6 ... 145 | 8.7 ... 145 | 7.3 … 145 | ||||||||
| Through piston rod S2/S20 | [MPa] | 0.15 ... 1 | 0.13 ... 1 | 0.12 ... 1 | 0.1 ... 1 | 0.08 ... 1 | — | ||||||
| [bar] | 1.5 ... 10 | 1.3 ... 10 | 1.2 ... 10 | 1 ... 10 | 0.8 ... 10 | — | |||||||
| [psi] | 21.8 ... 145 | 18.9 ... 145 | 17.4 ... 145 | 14.5 ... 145 | 11.6 ... 145 | — | |||||||
| Ambient temperature(1) | °C | –20 ... +80 | |||||||||||
| CRC(2) | 2 | ||||||||||||
1) Note operating range of proximity switches
2) More information www.festo.com/x/topic/crc
| Compact cylinder | |||
|---|---|---|---|
| [1] | Cylinder barrel | Wrought aluminium alloy | |
| [2] | Cover | Wrought aluminium alloy | |
| [3] | Piston rod | Ø 12 ... 32 | High-alloy stainless steel |
| Ø 40 ... 125 | High-alloy steel | ||
| [4] | Flange screws | Ø 12 ... 16 | High-alloy stainless steel |
| Ø 20 ... 125 | Galvanised steel | ||
| [5] | Dynamic seals | Basic version: Polyurethane, S6: Fluoro rubber | |
The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount , but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance , according to the original quality standards , during warranty with product problems , need confirmation testing by the manufacturer , the supplier to be solved , the demand side due to storage , use, poor maintenance caused by lower-quality product , and not raise objections.
You can send a sample to customize the products, we have many engineers can help it; If you want a product of mine, but you are not sure if it's what you want, so you can ask for a sample from me, it will be free.
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
| Our product features: | Our Services Guarantee: |
|---|---|
| 1) Competitive price | 1) Prompt respond (Reply with 24 hours) |
| 2) Good quality | 2) Free Samples (Customer pay for the delivery cost) |
| 3) Professional Packaging | 3) 1 year warranty |
| 4) Produce according to Customers’ instruction | 4) Photos/videos are available during production. |
| 5) None delay shipment | 5) Loading inspection, and send loading photos before shipment. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.