Water Solenoid Valves

Electronic Fixed time-like Draw-off valves ADV-15T Air compressor solenoid valve Specifications 1. Adjustable "on " and "off" cycle times 2. Low power consumption 3. Bright LED lights indicating operational status. 4. Cycle test button 5. Brass body with FKM for both petroleum and synthetic based oils. 6. Simple reliable construction. 7. Easy serviceability with Strainer Ball Valve. Sizes and pipe connection: 1/2" inlet at strainer ball valve 1/4", 3/8" and 1/2

AD-5 ORION Auto Drain Traps for Automatic Drain Release of water and oil drain Air compressor parts Model AD-5 Applicable pressure (Gauge pressure) 0.3~0.97 Mpa (3~9.9 kgf/cm 2 ) [42.7~140.8 psiG] Allowable ambient temperature 2 ~ 60 ℃ [36 ~ 140 °F] Applicable fluid Compressed air Inlet/outlet pipe connection Rc ½ Diameter of main drain valve φ3.5 mm [0.138”] External dimensions (H×W×D) 198×(133)×79 ／mm [7.8”×5.24”×3.11”] Specification 1. Note: The product is for industrial.

2S025-08 2 Way Stainless Steel Direct-Acting Normal Temperature Water Solenoid Valves Features: 1.Direct-Acting, conductive, normally closed. 2.Valve body material is Stainless steel. 3.Can be operated directly without pressure. 4.Small size and easy assembly. 5.Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: ± 10% , DC Voltage tolerance:±1%. 6.Other special AC/DC can be made to client's order. 7.Thread: BSPT, NPT , BSP. 8.The standard product fluid temperature

Taiwan UNID series Water solenoid valve 1/2" 3/4" Brass valve US-15 US-20 US-35 Feature 1. UD series is multiplex-drive, piston guide, conductive normal close. 2. Valve body made of cast bronze. 3. Standard voltage: 110VAC/220VAC/24VDC 4. Other special AC/DC can be made to client's order. 5. Screwed end : BSPT, NPT, BSP. 6. The standard product fluid temperature is 185℃(PTFE). 7. In special case, US can made 20 kgf/cm2, 30kgf/cm2, 40kgf/cm2. Please state the type of fluid

SCE238D005 238 Series Solenoid valve 1inch pilot operated 3/2way valve fluids air, inert gas and water temperature range -10°C to +85°C seal materials NBR (nitrile) FPM (fluoroelastomer) Differential pressure See «SPECIFICATIONS» [1 bar =100 kPa] Ambient temperature range -10°C to +60°C Maximum viscosity 40 cSt (mm 2 /s) FEATURES • Minimum operating pressure differential ∆P 0,3/0,5 bar • Two way valves for automatic control of water, air and inert gas and other gases

UNID UD-8 G1/4" 2/2Way Brass Conductive Water Solenoid Valves Normally Closed MODELWaterproof DIN/flying lead CoilNASS DIN Coil (IP65)PIPE SIZECVORIFICEFLUID TEMPOperating Pressure kgf I cm' (bar) Vacuum (Torr)Dimension (mm)Weight (kg)WaterAirLight oilGasLHDUD-6● 1/8"0.232.5mm-5°C~ +80°C0~70~70~70~70~10 -3416621.50.32UD-8● 1/4"0.232.5mm-5°C~ +80°C0~70~70~70~70~10-3416621.50.31UD-8● 1/4"0.584mm-5°C~ +80°C0~30~30~30~30~10-3416621.50.31UD-8 1/4"0.796mm-5°C~ +80°C0~10~10~10~

2W200-20 Orifice 20mm 3/4" Pilot Diaphragm Drive Brass Material Water Solenoid Valves 2W200-20 Orifice 20mm 3/4" Water Solenoid Valves Features: 1.Pilot diaphragm drive, normally closed. 2.Valve body material is brass. 3.Can be operated directly without pressure. 4.Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: ± 10% , DC Voltage tolerance:±1%. 5.Other special AC/DC can be made to client's order. 6.Thread: BSPT, NPT , BSP. 7.The standard product fluid

3inch Operated Directly 760mm Water Solenoid Valves , Threaded 2 Way Brass valves 3" Threaded 2 way Water Solenoid Valve Features: 1. Thread: BSPT, NPT , BSP. 2. The standard product fluid temperature is 80C(NBR). 3. Temperature:fluororubber(130C), Silicon(130C), PTFE(185C). 4. DIN43650A connector Coil is interchangeable 5. Pilot diaphragm drive, normally closed. 6. Valve body material is brass. 7. Can be operated directly without pressure. 8. Standard voltage : 24VDC,110VAC, 220VAC

UNID UW-20 Water Valve 2 way Full Copper Normally Closed Solenoid Valve brass water solenoid valve Description 1. Using direct diaphragm structure to start without pressure expands its application field. 2. The flat diaphragm structure is reliable in opening and closing, and the service life of the product is enhanced. 3. Choosing plastic-encapsulated coil can improve the safety of the product in many environments. Application There are many kinds of solenoid valves.

ADTV-13 14 15 GAS TANK LEVEL SENSING INTELLIGENT AUTOMATIC DRAINAGE VALVE Description: ADTV-13 1. The input tube should be tilted downward continuously > 1% allows condensate to flow naturally into the water storage tank 2. Do not install small filters and U-shaped pipelines before inlet, which will affect the self-circulating energy of condensate water 3. The entrance can only use large diameter ball valve or gate valve, butterfly valve, and to ensure that there is enough

PU225-06 AC220V Brass Electric Water Solenoid Valve Low Pressure Air Water Pneumatic Steam On Best Sale Sanmin SHAKE PU225 series solenoid valve, it is 2/2way, internal piloted type. It can be equipped with timer to control water drain timely. IP65, Insulation F class. Specification: Model PU225-03 PU225-04 PU225-06 PU225-08 Orifi ce Size(mm) 13mm 13mm 25mm 25mm CV Value 4.5 4.5 12 12 Port Size G3/8" G1/2" G3/4" G1' Fluid Compressed Air,Water,Light oil (Below 50CST) Operation

2S350-35 Stainless steel Threaded solenoid valve 1 1/4inch water valve 2S series is direct-drive,conductive,normak close, valve body made of investment casting SS316, 2S can be operateddd directly without pressure, Small size and easy assembly,Standard voltage :110VAC/220VAC/24VDC, Other special AC/DC canbe made to client's order, Screwed end:BSPT,NPT,BSP.Viton 130s℃ Silicon 130 ℃PTFE 185 ℃NBR 80℃ 2W Series 2W025-08 2W040-10 2W160-15 2W200-20 2W250-25 2W350-35 2W400-40 2W500

2W350-35 1 1/4inch 2 Position 2 way Normally closed brass water valve AC220v solenoid valve 2W series small oriffice Fluid Control Valve, also known zero-pressure solenoid valve, the initial state for normally closed,normally open only available for below 3/8", thread size range from 1/8" to 3/8", Din connector type and flying leads type,anti-explosion and anti-water coil are available. With the stalbe quality and wide application, 2W valve is popular with customers,

238 series Solenoid valve SCE238D001 SCE238D002 SCE238D004 SCE238D005 2/2way Water valve FEATURES • Minimum operating pressure differential ∆P 0,3/0,5 bar • Two way valves for automatic control of water, air and inert gas and other gases/liquids compatible with the sealing materials used • Interchangeability of magnetic heads, AC and DC • The solenoid valves satisfy all relevant EU Directives GENERAL Differential pressure See «SPECIFICATIONS» [1 bar =100 kPa] Ambient

PA-68 ZDPS-15 Auto drain trap air compressor air storage tank high pressure electronic switch drain valve Parameter Description: 1. Applicable fluid: various compressed gases 2. Working pressure: 0~16Bar 3. Operating temperature: 0~80℃ 4. Inlet pipe diameter: 1/2 "NPT 5. Drainage pipe: Φ8 Product Features: 1. Extra large orifice, easy to discharge sludge-like sewage; 2. High reliability, it is the best choice for the cooler and air storage barrel to automatically discharge

BV2011S Electric ball valve , DN32 Synchronous motor valve DC24V AC220V Specifications: Motor type Synchronous motor Length of power wire 300 mm Action time 15 s Connect type G thread Shut-off diff. press. ≤0.6 Mpa Nominal pressure PN16~PN20 Medium temperature 2~95 ℃ Power 6W (Only when open the valve) Suitable medium Cold, hot water or 50% Ethanol solution) Vpltage (50/60 Hz) 24VAC/110VAC/220VAC Structure: Product Specifications Port Product dimension (mm) KN value Mpa Net

24VDC,110VAC 2W160-15 Round Coil 2 Way Brass Water Solenoid Valve With Customized 2W160-15 Round coil 2 way Brass Water Solenoid valve Features: 1.Pilot diaphragm drive, normally closed. 2.Valve body material is brass. 3.Can be operated directly without pressure. 4.Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: ± 10% , DC Voltage tolerance:±1%. 5.Other special AC/DC can be made to client's order. 6.Thread: BSPT, NPT , BSP. 7.The standard product fluid

24VDC,110VAC 2W025-08 UD-8 Small Size And Easy Assembly Water Solenoid Valves Features: 1.Direct-Acting, conductive, normally closed. 2.Valve body material is forged brass. 3.Can be operated directly without pressure. 4.Small size and easy assembly. 5.Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: ± 10% , DC Voltage tolerance:±1%. 6.Other special AC/DC can be made to client's order. 7.Thread: BSPT, NPT , BSP. 8.The standard product fluid temperature is 80C(NBR)

24V 50mm Orifice Unid, CKD 2 Way Stainless Steel Water Solenoid Valves 2S500-50 Ordering Code 2S160-15 2S200-20 2S250-25 2S350-35 2S400-40 2S500-50 Acting Type Normally Closed Jiont Thread Size 1/2″ 3/4″ 1″ 1-1/4″ 1-1/2″ 2″ Orifice 16mm 20mm 25mm 35mm 40mm 50mm CV value 4.8 7.6 12 24 29 48 Working pressure Water, Oil:0.15～0.5 Mpa , Air, gas: 0.15～0.85Mpa Max.pressure 1.05 Mpa Temperature(℃) -5-80℃ or -5-130℃ Valve body Zinc Alloy, Brass Seal NBR, EPDM or fluororubber Medium Air,

35mm Orifice Unid, CKD 2 Way Stainless Steel Water Solenoid Valves 2S350-35 Ordering Code 2S160-15 2S200-20 2S250-25 2S350-35 2S400-40 2S500-50 Acting Type Normally Closed Jiont Thread Size 1/2″ 3/4″ 1″ 1-1/4″ 1-1/2″ 2″ Orifice 16mm 20mm 25mm 35mm 40mm 50mm CV value 4.8 7.6 12 24 29 48 Working pressure Water, Oil:0.15～0.5 Mpa , Air, gas: 0.15～0.85Mpa Max.pressure 1.05 Mpa Temperature(℃) -5-80℃ or -5-130℃ Valve body Zinc Alloy, Brass Seal NBR, EPDM or fluororubber Medium Air, water,