Infrared fire detector low calorific value Heavy Oil Burner apply in building materials

Infrared fire detector low calorific value Heavy Oil Burner apply in building materials


1: Can be customized
2: Good after-sale services
3: Advanced bubble atomization technology


Introduction:

SKBS-RY Bubble Fuel Burner, using a variety of oil as fuel and adopting the advanced combustion technology design and advanced processing technologies, is suitable for various industrial applications, especially efficient combustion of heavy oil with high-viscosity, Residual oil, tar and by-products oil.  SKBS-RY Bubble Fuel Burner is widely used in metallurgy, electric power, petrochemical, building materials, light industry and so on.

Features:

1: Due to the advanced bubble atomization technology, spray particles are small (SMD ≤ 35μm), and the particle size distributes equally.

2: Combustion degree is basically free of the effect of the fuel viscosity. Heavy oil and residual oil heated to just above 80 °C can be achieved direct ignition in cold furnace.

3: Burner doesn’t coke and plug. It burns with full combustion, no black smoke, no backfiring, and no blow-off phenomena

4: Flame length, flame angle and flame shapes can be designed according to user’s requirements

5: The product has wide range of fuel flow control and operation flexibility.

6: the product has rigid flame and combustion stability.

Technical indexes:

A: Combustion efficiency: ≥ 99%
B: Adjustment ratio: 1:6
C: Excess air ratio: 1.05 ~ 1.15
D: Combustion air temperature: 20 °C ~ 500 °C

Specifications:

model    flow    Heat    Spray    Combustion    Combustion air    Flame     Flame cone angle
load     pressure    oil     length
        TEMP/°C    Pressure/MPa    Pressure/MPa    TEMP/°C     Air volume/Nm3/h    
SKBS-RY-10    10    10    ≥0.25    >80    ≥0.2    >0.15    20~500    120    0.4~1.5    20°~90°
SKBS-RY-20    20    20    ≥0.25    >80    ≥0.2    >0.15    20~500    240    0.4~1.5    20°~90°
SKBS-RY-40    40    40    ≥0.25    >80    ≥0.2    >0.15    20~500    480    0.4~1.5    20°~90°
SKBS-RY-60    60    60    ≥0.25    >80    ≥0.2    >0.15    20~500    720    0.4~1.5    20°~120°
SKBS-RY-80    80    80    ≥0.25    >80    ≥0.2    >0.15    20~500    960    0.4 ~ 4    20°~120°
SKBS-RY-100    100    100    ≥0.25    >80    ≥0.2    >0.15    20~500    1200    0.4~4.5    20°~150°
SKBS-RY-150    150    150    ≥0.25    >80    ≥0.2    >0.15    20~500    1800    0.4 ~ 6    20°~150°
SKBS-RY-200    200    200    ≥0.25    >80    ≥0.2    >0.15    20~500    2400    0.4 ~ 6    20°~180°
SKBS-RY-300    300    300    ≥0.3    >60    ≥0.3    >0.20    20~500    3600    0.4 ~ 8    20°~180°
SKBS-RY-500    500    500    ≥0.3    >60    ≥0.3    >0.30    20~500    6000    0.4 ~ 8    20°~180°
SKBS-RY-800    800    800    ≥0.3    >60    ≥0.3    >0.30    20~500    9600    0.4 ~ 8    20°~180°
SKBS-RY-1000    1000    1000    ≥0.3    >60    ≥0.3    >0.30    20~500    12000    0.4 ~ 8    20°~180°
SKBS-RY-1200    1200    1200    ≥0.3    >60    ≥0.3    >0.30    20~500    12000    0.4 ~ 8    20°~180°
fuel burner with Large flow can be designed and manufactured according to user’s requirements

Note:

1: Flame length and flame cone angle can be designed in accordance with user’s requirements, and the design scope is in the above table.

2: Spray medium refers to saturated steam or compressed air.
3: Fuel types are as follows: diesel oil, heavy oil, residual oil, orimulsion, mixed oil, tar, asphalt oil, coal tar, waste oil and so on.

4: Oil and gas dual burner or special burner can be designed according to user’s requirements

5: High-pressure oil burners used in furnace and high-pressure oil burner can be designed according to the user’s demand   

6: Burner can be used in a vacuum furnace


    Established in 2001, Beijing Shenkebosi Thermal Energy Engineering Technology Co., Ltd. is a professional manufacturer and exporter that is concerned with the design, development and production of heat energy non-standard equipment, research and development, design and manufacture of high-tech enterprise. We are located in Tongzhou District , Big Colliers Industrial Zone, Beijing , with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.

    Covering an area of 17, 000 square meters, we now have over 350 employees, and boast an annual sales figure that exceeds USD 2000 and currently export 30 kinds of our products throughout the world.

    Our well-equipped facilities and excellent quality contolling throughout all stages of production enable us to guarantee total customer satisfaction. Besides, we have received ISO9001: 2000.

    As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching Russia, France, Ukraine, Macedonia, Korea, United Arab Emirates, Indonesia, Iran, Sudan, Germany, and other countries.
    
    If you are interested in any of our products, please feel free to contact us. We are looking forward to forming successful business relationship with new clients around the world in the near future.
    
    We specializes in designing and manufacturing different kinds of industrial burners, industrial igniters and so on (please see the details from our website)
    
    Our factory is a 10-year old factory and many of our products have been exported to foreign countries such as India and Germany via trading company. Now, to make our clients obtain more discount and better service, we decide to do it by ourselves.