LiFePO4 51.2V 100Ah 5kWh Deep Cycle Battery Pack Built - In Smart BMS Backup

Price Negotiable

Price: usd 1

MOQ: 50 pcs

Delivery Time: 7-25 days after order confirm

Brand: TAC

Product Description

LiFePO4 51.2V100Ah 5kWh Deep Cycle Battery Pack Built-In Smart BMS – Backup

1.Function Characteristics

Using mature and stable lithium iron phosphate cell, 3.2V100Ah

With parallel current limiting function

Compatible with multiple protocols to match multiple inverters

Support a variety of communication modes, one RS485 parallel communication, the other RS485 can

connect to external inverter, CAN connect to external inverter

Power indicator and status indicator function

2.Parameters(Ta=23℃)

NO	Project	Qualification	Remarks
2.1 Technical requirements for battery module
2.1.1	Minimum capacity	Rated capacity*97%	0.5C/25℃
2.1.2	Rated capacity	100Ah
2.1.3	Nominal voltage	51.2V	16 Series
2.1.4	Chassis dimensions
2.1.5	Chassis material	Q235
2.1.6	Waterproof grade	IP30
2.1.7	Charging maximum voltage	58.4V	3.65V/pcs
2.1.8	Discharge minimum voltage	40V	2.5V/pcs
2.1.9	Standard charging current	0.33C
2.110	Max continuous charging current	1C
2.1.11	Standard discharge current	0.33C
2.1.12	Max continuous discharge current	1C
2.1.13	Cycle life	≥3000 cycles	0.2C charging, discharge/25℃/ 80%DOD
2.1.14	Weight	45.0KG	(based on the actual weight of the product)
2.1.15	Discharge operating temperature range	-20～+65℃	Try to avoid the battery being exposed to high temperature (≥35℃) for a long time. High temperature and low power will easily lead to accelerated degradation of battery performance.
2.1.16	Storage temperature	-20～+50℃	SOC40～60%
2.1.17	Relative humidity	5～95%	No condensation, battery system working properly
2.1.18	Height	＜3600m
2.1.19	Quality guarantee period	3 years	3-year free warranty maintenance
2.1.20	Shipment with electricity	SOC:20%-60%:	51V-52.8V
2.1.21	communication port.	RS 2321+CAN2
2.1.22	Run, alarm LED light display	LED light (green,red)
2.1.23	Anti-theft function	Not
2.1.24	Communicating protocol	CAN protocol
2.1.25	Charging limit current	20A
2.1.26	Reverse protection	Not
2.1.27	Dial switch	6 bit binary
2.1.29	Display screen	Yes
2.1.29	Dry connect	Not
2.1.30	Capacitive load	30000uF(Max)
2.1.31	Heating film	200W

3.System schematic diagram

4.External Characteristics

5.Operating Instruction

Before using the batteries, carefully read the service manual and the specification of the batteries.

Please use the batteries in a normal environment, charge temperature is 0℃~45℃, discharge temperature -20℃~60℃

and the relative humidity is 65%±20%.

During their use, the batteries should be kept away from heat sources and high voltages, children should not be allowed

to play with them, and they should not be knocked violently.

In no circumstance should the positive and negative poles of the battery be short circuited. Do not disassemble or

assemble the batteries yourself and do not place the batteries in a damp place in order to avoid danger.

When the batteries are not to be used for a long time, please store them safely so that they will stay in a half-charged

state. Please wrap the batteries with non-conductive materials in order that metallic materials will not contact the

batteries directly, which may result in damage to the batteries. Keep the batteries in a cool and dry place.

Please dispose of the used batteries properly. Do not throw them in fire orwater.

If the battery is to be used in other devices, please consult with the supplier about the degree of perfection of its

protective function, Do not make arbitrary decisions to use battery in other devices.

6.Cautions

emperature range during charging

The recommended temperature range for battery charging is between 0℃ and 45℃. Charging of the

batteries out of that temperature range will cause the performance of the batteries to decrease and their

life to shorten.

Consultation

When purchasing the batteries, be careful to remember the way to stay in contact with the seller so that

you can contact the seller and have consultation with it when needed.

Warranty period

The manufacturer will not replace the battery free of charge even in the warranty period if the problem

with the battery results from misuse rather than bad quality.

Safety use guaranteed

If the battery is to be used in other devices, please consult with the supplier about the degree of

perfection of its protective function. You should at least have a clear knowledge of such issues as the

heavy current, fast charging and special application of the battery

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Guang Zhou Sunland New Energy Technology Co., Ltd.

Location No.27 BOWANG Street ,Nan Cun Town, Panyu, Guangzhou, GD,China

Contact Person Alice

Request A Quote

Email Address *

Please check your email address.

Phone / WhatsApp

Your Message *

Your message must be at least 20 characters.

LiFePO4 51.2V 100Ah 5kWh Deep Cycle Battery Pack Built - In Smart BMS Backup

12v 32700 25.6V 55AH LiFeP4 Battery Pack With Blue Tooth

3.6v Lisocl2 Battery ER26500 9AH With connector for Water meter Ammeter

18650 Lithium Ion Battery Pack 14.8v 5.6ah With UL2054 For Street Lighting

Solar Battery IFR14500 AA 3.2V 600mAh LiFePO4 Battery For Solar light

18650 10S4P Rechargeable Lithium Bottle Electric Bike Battery Pack 36V 10Ah

Residential Battery Energy Storage System ESS Battery Cabinet

ER14250 Lithium Battery 3.6 v 750mAh non rechargeable For Electronic Tag

3.0V CR2 200mAh Lithium battery of LiFePO4 Battery Cell for Meridian Pen

32700 6000mah Lifepo4 Battery Cell 3.2v 6ah For Solar Light Battery 12 Month Warranty

21700 Lithium ion Cylindrical Battery For Energy Storage System 3.7V 5000MAH

Lithium 9V Battery 220-550MAH Rechargeable Lithium Ion prismatic Battery pack

GSP6532100 3.7V 2100mAh Lithium Ion Polymer Batteries Cells

Get in Touch

Request A Quote