1100mah Polymer Lithium Ion Batteries 3.7V Pouch Cell 603450
Polymer Battery in lithium ion Batteries 3.7V Pouch Cell 603450
Key Word : Polymer Battery in lithium ion Batteries 3.7V Pouch Cell 603450 1100mah 3.2V For GPS
Specification for Polymer Battery in lithium ion Batteries 3.7V Pouch Cell 603450
| No. | Items/項目 | Specifications/規格 |
Remark 備注 |
| 1 |
Nominal Capacity 標稱容量 |
1100mAh |
0.2C Standard discharge 0.2C 標准放電 |
| 2 |
Minimum Capacity 最小容量 |
950mAh | |
| 3 |
Nominal Voltage 標稱電壓 |
3.7V |
Mean Operation Voltage 即工作電壓 |
| 4 |
Charge Voltage 充電電壓 |
4.2V±0.03V |
By standard charge method 標准充電方式 |
| 5 |
Standard charging method 標准充電方式 |
0.2C constant current,4.2V constant voltage charge to 4.2V,continue charging till current decline to ≤0.01C |
0.2C恒流4.2V恒壓充至電流≤0.01C ,時間6.5(供參考) |
| 6 |
Charge current 充電電流 |
0.2C |
Standard charge, charge time:6.5h(Ref) 標准充電,時間6.5h(供參考) |
| 0.5C |
Rapid Charge, charge time:4.5h(Ref) 快速充電,時間3h(供參考) |
||
| 7 |
Standard discharging method 標准放電方式 |
0.2C constant current discharge to 3.0V, | 0.2C恒流放電至3.0V |
| 8 |
Discharge cut-off voltage 放電終止電壓 |
3.0V |
By standard discharge method 標准放電方式 |
| 9 |
Cell Internal Impedance 單電芯內阻 |
≤60mΩ |
Internal resistance measured at AC 1KHZ after 50% charge 半電態下用交流法測量內阻 |
| 10 |
Maximum charge current 最大充電持續電流 |
0.5C |
For continuous charging mod 連續充電模式 |
| 11 |
Maximum discharge current 最大放電持續電流 |
1C |
For continuous discharge mod 連續放電模式 |
Application for Polymer Battery in lithium ion Batteries 3.7V Pouch Cell 603450
Battery Photos:
Battery Pack Engineer Drawing :
| NO | Items | Units: mm | Remark | |
| 1 | Thickness/厚度 | T | 6.3 | Max. |
| 2 | Width/寬度 | W | 34.5 | Max. |
| 3 | Height/長度 | H | 54.5 | Max. |
| 4 | Wire/引線外露 | L | 60±3 | |
| 5 | 剝線長度 | L1 | 2mm | 頂端加錫 |
Packing Method
Aging Equipment for TAC Factory
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.