Leroy Somer Alternator Automatic Voltage Regulators AVR R448
Leroy Somer Alternator Automatic Voltage Regulators AVR R448
R448 Automatic Voltage Regulator (AVR) provides closed loop control of the alternator output voltage by regulating the exciter field current. The primary winding has a voltage in ratio to that of the alternator (characteristic shunt), the next has a voltage in proportion to the stator current (compound characteristic: booster effect). Which is powered by two auxiliary windings which are independent of the voltage equal circuit. The power supply voltage is rectified and filtered before being used by the AVR monitoring transistor. With PMG excitatioin, a permanent magnet generator (PMG) added to the alternator supplies the AVR with voltage which is free of the main alternator winding. This is built-in at the rear of the machine and connected to the R448 AVR, and the ST9 jumper must be disconnected.
*Quadrature droop adjustment
*AVR Voltage adjustment
*Stability adjustment
*LAM Threshold (underspeed) adjustment
*Excitation ceiling adjustment
*Selection of single phase or three phase
*voltage sensing
*Selection of normal or rapid response time
*50 Hz or 60 Hz frequency option
*Remote voltage adjustment option
*LAM enable/disable option
*Alternator frame selection
*Excitation system selection
Specificaion
Input voltage: 70-140V AC, (PMG, or auxiliary winding, single, three phases)
Reaction is measured : 90-480V AC
MAX. output :DC 10A 125V
Function: Built-in low-speed , over excitation LAm
REGULATION: +/-0.5%
| R448 | |
| Voltage regulation | ± 0.5% |
| Remote voltage adjustment range | ± 5% |
| Short circuit capability | 3 x Irated for 10 seconds |
| Voltage sensing | 95 to 140 volts (50/60 Hz) |
| 170 to 260 volts (50/60 Hz) | |
| 340 to 520 volts (50/60 Hz) | |
| Response time | Normal (1 sec) for ± 20% voltage variation |
| Rapid (0.3 sec) for ± 20% voltage variation | |
| Sensing voltage |
terminal 0-110V=95-140V terminal 0-220V =170-260V terminal 0-380V=340-520V |
| Frequency | 50-60Hz |
| Voltage input | 40-50VAC, 3 phase |
| Harmpnic auxiliary winding | 6-150VAC (no-load rms) |
| Output Voltage | max 160VDC at 120VAC input |
| Current | max 10A |
| Resistance | 15 ohms minimum |
| Regulation | +/-5% RMS with 4% engine governing |
| Voltage build-up | Residual voltage at avr terminal≥5VAC |
| External Voltage Adjustment | +/-10% with 1k ohm 1 watt trimmer |
| Generator Power | 50-300kw |
Shipment Term
1. We Ship to Worldwide, except APO/FPO
2. Orders processed timely after showing remittance copy.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your address.
4.Items are shipped from China by Airmail, reach most of the countries within 4 to 20 business days.
5.Delivery time depends on destination and other factors, it may takes up to 20 business days.
6. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
7. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Guarantee
1. Guarantee:1 year after selled.
2. During guarantee,the items share free repairs or replacement.
3. Customer is responsible for the freight come-and-go,and the custom tax.
4. You may consider to send the defective item with a economical way,and we send back the repaired items with your new order together.
5. To save the cost,pls send the item back without packing.
6. Pls provide the defective appearance and related invoice number.
7.We do not repair or replace item with an expired warranty.
8.All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email or give us a call any time.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.