Class 1 Save Space Power Surge Protector SPD 15kA Only 27mm Width
1+2 class 100kA surge protector SPD
OBV-I25:
| Rated voltage(VDC) | 240/415Vac |
| Iimp(impulse discharge current for class I test) | 15KA |
| In(nominal discharge current for class II test) | 15kA |
| Up(voltage protection level) | ≤1.5kv |
| response time | ≤100ns |
| Signal deterioration indication | off-work；on-replace |
| Housing Material | Red thermoplastic material |
| Housing self-extinguishing class | UL94_V0 |
| Temperature range | -40℃～+80℃ |
| humidity range | 5%～95% |
| Elevational | ≤3000m |
| Method of connecting wire | multiple(Connect In Parallel ) |
| Thread Dimensions | 1.5mm2～35mm2 |
| Mounting method | 35mm standard rail installation |
| IP(degree of protection of enclosure) | IP20 |
Product Features:
combination type SPD
The smallest size single phase surge protector of Iimp: 15KA ；
only 27mm width, save space;
Sealed metal air gap technology,high energy electronic trigger discharge gap, with the ability to block continuous flow
Low output residual；
fast response time (≤100ns);
lower voltage protection level ≤1.5kV
Testing Equipment
The combination type SPD characteristics:
The integrated 1+2 class surge protector is designed according to IEC and GB standards. It adopts the unique MOV and graphite gap series technology. It is suitable for 240/415VacTN, TT three-phase system and can withstand 15KA lightning impulse current. It is usually installed in the LPZ0 area and The LPZ1 area has the advantages of no leakage current, no freewheeling current, low residual voltage, monitorability, convenient installation, etc. It is widely used in various power protection.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.