Professional 380V Double Layer Roll Forming Machine with 15m/min Speed for 0.3-0.6mm Wall Panels
| Packaging Detail |
1. Tighten to container with steel wire rope and welded machine with container by angel iron 2. Main forming machine and un-coiler is naked (If you need we can also packed with water-proof plastic) 3. PLC control system and motor pump are packed with water proof paper coverage |
|---|---|
| Delivery Detail | 15-20 days after getting advance payment |
| Parameter | Specification |
|---|---|
| Material Type | PPGI/GI |
| Thickness | 0.3-0.6mm |
| Width | Upper: 1200mm; Down: 1220mm |
| Roller Stations | Upper: 12 Stations; Down: 15 Stations |
| Roller & Shaft Material | 45# Steel Quenching and Plating |
| Diameter of Shaft | Φ70mm |
| Cutter Material | CR12 |
| Drive Type | Chain Drive |
| Speed | 15m/min |
| Total Power | 5.5+5.5KW |
| Voltage | 380V 50Hz 3Phases (can be customized) |
| Component | Description |
|---|---|
|
5T Manual Decoiler
|
This part is used to support coil and make the coil in a rotary way.
|
|
Feeding Table & Pre-Cutter
|
Guides the coil into correct position and directs it to the roll forming part. Includes a hand pull cutting device for convenient pre-cutting when changing color or thickness. |
|
Shaft & Roller
|
Material is 45# Steel Quenching and Plating. The processed rollers are smooth, hard and will not rust. Will not leave any scratches on the sheet when working. |
|
Hydraulic Pump Station
|
Drives the cutter to start cutting works. The hydraulic tank uses 46# hydraulic oil. Equipped with cooling fan for internal circulation cooling to ensure the oil pump station will not be affected by high oil temperature during working. Solenoid valve brand: Huade |
|
Touch Screen Control Cabinet
|
The control cabinet has two modes: automatic and manual. The unit length of the targeted sheet and quantity can be set in the touchscreen. The system is simple and easy to operate. Electrical Component Brands:
|
|
Pressing Section & Cutter
|
The material of blade is CR12. With high strength, better hardenability and good wear resistance. |
|
Output Table
|
This part is used to collect the formed products. The bracket is equipped with rollers to facilitate product forwarding without being scratched. |
| Part | Quantity |
|---|---|
| Chains | 2 Sets |
| Solenoid Valve | 1 Set |
| Travel Switch | 2 Sets |
| Open-End Wrenches | 2 Sets |
| Hexagon Wrench | 2 Sets |
| Counter | 1 Set |
| Wrench | 2 Sets |
| Oil Seals | 1 Set |
Customized Double Layer Roof Tile Roll Forming Machine Process flow:
Decoiler → Feeding & Guiding → Roll forming → Hydraulic pressing → Hydraulic Cutting → Product to run out table
- Material: Color steel sheets
- Machine speed: 8-12m/min
- 18 years manufacturing experience
- CE & ISO certified
- Professional roll forming machine manufacturers
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.