Electrical 1250MM Width Double Deck Roll Forming Machine
Electrical 4 + 4 kW Double Layer Roll Forming Machine Wholesale
Machine details
| No | ||
|
1
|
Suitable Material | q235 |
|
2
|
The width of the raw material | 750/1200mm |
| 3 | Rows of rollers |
Upper level: 11Rows Down-level: 12 Rows |
| 4 | Appearance size | 7200*1550*1910mm |
| 5 |
Total power
|
4 + 4 KW |
| 6 | The thickness of the raw material | 0.3-0.6mm |
| 7 | Productivity |
Upper level: 1-3 m/min Down-level:15-20m/min |
| 8 | Diameter of shaft | ￠70mm |
|
9
|
Voltage | 380V 50Hz 3phases |
Machine Roller
- This machine is made up of roll forming machine, molding press, cutting machine, PLC computer control and hydraulic system
- This machine is applied to roof fortification
- The machine is stable, no noise and no shake.
- the cutting machine is characterized by stable driving, easy operation
- Controlling by computer, PLC display, the operation is easy and running is steady and reliable, endurable, maintenance-free
- Hydraulic system use the CDF-10 hydraulic pump, long operating life, no noise
Control
1. Manually put colored steel coil into the feeding table.
2, manually press the forward button on the top of the control box, this is the start of the operation of the equipment, until the plate out of the cutting knife part, stop pressing the forward button, press the cutting knife down, cut out the exposed part.
3. Set the number of meters and sheets to be processed on the display screen, adjust the control to the automatic upper part, press the start button, and the device will automatically press the plate
4. After each plate is cut off, manually remove the plate from the cutting edge
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.