Single Phase / Three Phase Power Supply Online UPS For Communication System
Single Phase / Three Phase Power Supply Online UPS For Communication System
Applications range
Specifically design products for communications systems and related equipment .
Outdoor Design: waterproof and security, easy of installation and maintenance. Use lead-acid gel batteries which can be used within the normal range of outdoor temperature -20 ℃ ~ 60 ℃, effectively improve the battery life.
Four time-clock control function set, effectively extending the life of the battery discharge time and (optionaFor China Power Grid, we increase voltage surge suppressors on the output of the power supply , with full stable functionality, extending battery life, making the connected devices of the power supply protected better .Use advanced input broadband technology : can still ensure normally output in the mains frequency of serious drift.Load capacity: for the characteristics with transient load power , use advanced power devices, enhanced load capacity.
Good electromagnetic compatibility: The machine adopts advanced anti-electromagnetic interference, making the electromagnetic compatibility better, would not causing interference to the device.Using a high-power high-frequency charger and advanced charging method, greatly reducing battery charging time, effectively extending the battery life.
Perfect protection function, with the battery voltage, overload, output short circuit protection, with anti-surge interference, lightning protection.With unattended function, when utility power failure occurs for a long time which result in automatically turned off because of the power supply undervoltage.
Adopt modular design,it is more convenient to maintain. Dry remote communication monitoring node (optional).
Performance indicators
|
Model |
DF100 |
DF200 |
DF400 |
DF1000 |
|
|
input |
Voltage Range |
165 Vac～275Vac |
|||
|
Frequency Range |
50Hz±10% |
||||
|
Maximum input current |
1.5A |
2.5A |
4.5A |
6.5A |
|
|
output |
Voltage ( inverter status ) |
220Vac |
|||
|
Frequency ( inverter status ) |
50Hz |
||||
|
Maximum power |
100W |
200W |
400W |
600W |
|
|
Work way |
Back-up |
Online Interactive |
|||
|
Battery |
battery inside |
Using gel batteries |
|||
|
Charging time |
10 hours can arrive 90% |
||||
|
Standby time |
Any configuration |
||||
|
Sharing features four clock settings |
Effectively extending the battery discharge time ( optional ) |
||||
|
Protection Features |
Battery undervoltage |
Alarm and automatic shutdown, utility power is restored from the start |
|||
|
Overload, short circuit |
Fuse protection |
||||
|
Mains Surge |
Surge attract |
||||
|
Lightning |
20KA professional lightning protection module with trip function |
||||
|
Conversion characteristics |
Switching time |
≤5ms |
|||
|
Interface |
Optional |
main contact |
RS232 or RS485/main contact |
||
|
Additional features |
Optional |
With a precise timer , cloud -powered electric period can be set |
|||
|
Alarm features |
Mains status indication |
Light, shows work on the mains power supply UPS status |
|||
|
Inverter status indication |
Light, shows work on the mains power supply UPS status |
||||
|
Fault status indication |
Light, shows UPS failure or low battery protection |
||||
|
Alarm with Sound |
UPS alarms work once every three seconds when the battery inverter state, when the battery voltage while sounding . |
||||
|
Communicate |
Remote node communication monitoring main contact |
||||
|
System |
Suit environment |
Outdoor Waterproof Security applicable type |
|||
|
Ambient temperature |
-20～60℃ |
||||
|
Noise |
<50dB(A) |
||||
|
Dielectric strength |
YD/T1095-2008 |
||||
|
EMC |
YD/T1095-2008 |
||||
|
Installation |
①Fixed ground ②Hanging |
||||
|
Net weight |
26kg |
28kg |
42kg |
45kg |
|
|
Mechanical Dimensions(mm)(W×D×H) |
470x245x750 |
470x245x810 |
|||
* Actual product , the above specifications are subject to change without notice.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.