Tungsten Carbide Button Drill Bit R32 Dia 64mm Flat Face Or Drop Center
R32 Drill Bit With High Grade YK05 Tungsten Carbide Inserts
Thread: R32
Color: Green or Based on Customer requirements
Type: R32 Drill Bit
Widely used drifting and tunneling
R32 Thread Button Bit Specification
| R32 Button Bit | ||||||||
| Diameter | Buttons and Size (mm) | Flushing hole | Weight | Part Number | ||||
| mm | inch | Front | Gauge | Angle | Front | Side | kg | |
| Spherical | ||||||||
| 41 | 1 5/8 | 2×9 | 4×9 | 35° | 1 | 1 | 0.6 | 4148300487 |
| 41 | 1 5/8 | 2×8 | 5×9 | 35° | 1 | 1 | 0.7 | 4148300488 |
| 43 | 1 5/7 | 2×9 | 5×9 | 35° | 1 | 2 | 0.7 | 4148300489 |
| 43 | 1 5/7 | 2×9 | 5×10 | 35° | 1 | 1 | 0.7 | 4148300490 |
| 43 | 1 5/7 | 2×9 | 6×9 | 40° | 2 | - | 0.7 | 4148300491 |
| 45 | 1 7/9 | 2×9 | 5×11 | 30° | 1 | 1 | 0.8 | 4148300492 |
| 45 | 1 7/9 | 2×9 | 6×10 | 35° | 2 | - | 0.8 | 4148300493 |
| 45 | 1 7/9 | 3×8 | 6×10 | 30° | 3 | - | 0.8 | 4148300494 |
| 48 | 1 8/9 | 2×9 | 5×11 | 35° | 1 | 1 | 0.9 | 4148300495 |
| 48 | 1 8/9 | 2×9 | 6×10 | 40° | 2 | - | 0.9 | 4148300496 |
| 48 | 1 8/9 | 3×8 | 6×10 | 40° | 3 | - | 0.9 | 4148300497 |
| 48 | 1 8/9 | 3×9 | 6×10 | 30° | 3 | - | 0.9 | 4148300498 |
| 51 | 2 | 2×10 | 5×11 | 35° | 1 | 1 | 1 | 4148300499 |
| 51 | 2 | 2×10 | 6×10 | 40° | 2 | - | 1 | 4148300500 |
| 51 | 2 | 3×9 | 6×10 | 35° | 3 | - | 1 | 4148300501 |
| 57 | 2 1/4 | 3×9 | 6×11 | 35° | 3 | - | 1.3 | 4148300502 |
| 64 | 2 1/2 | 3×10, 1×10 | 6×11 | 35° | 3 | - | 1.6 | 4148300503 |
| 64 | 2 1/2 | 4×10 | 8×10 | 40° | 2 | - | 1.6 | 4148300504 |
| 76 | 3 | 4×11 | 8×11 | 40° | 2 | - | 2.6 | 4148300505 |
| Ballistic | ||||||||
| 41 | 1 5/8 | 2×8 | 5×9 | 40° | 1 | 1 | 0.7 | 4148300506 |
| 43 | 1 5/7 | 2×9 | 5×9 | 40° | 1 | 2 | 0.7 | 4148300507 |
| 43 | 1 5/7 | 2×9 | 6×9 | 40° | 2 | - | 0.7 | 4148300508 |
| 43 | 1 5/7 | 3×8 | 6×8 | 40° | 3 | 1 | 0.7 | 4148300509 |
| 45 | 1 7/9 | 2×9 | 5×11 | 30° | 1 | 2 | 0.8 | 4148300510 |
| 45 | 1 7/9 | 2×9 | 6×9 | 40° | 2 | 2 | 0.8 | 4148300511 |
| 45 | 1 7/9 | 3×8 | 6×9 | 40° | 3 | 1 | 0.8 | 4148300512 |
| 48 | 1 8/9 | 2×9 | 5×11 | 35° | 1 | 1 | 0.9 | 4148300513 |
| 48 | 1 8/9 | 2×9 | 6×10 | 40° | 2 | - | 0.9 | 4148300514 |
| 48 | 1 8/9 | 3×8 | 6×10 | 40° | 3 | - | 0.9 | 4148300515 |
| 51 | 2 | 2×10 | 6×10 | 40° | 2 | - | 1 | 4148300516 |
| 51 | 2 | 3×9 | 6×10 | 40° | 3 | 1 | 1 | 4148300517 |
| 54 | 2 1/8 | 3×9 | 6×10 | 40° | 3 | 1 | 1 | 4148300518 |
| 57 | 2 1/4 | 3×9 | 6×11 | 35° | 3 | - | 1.3 | 4148300519 |
| 64 | 2 1/2 | 4×10 | 8×10 | 40° | 2 | - | 1.6 | 4148300520 |
R32 Thread Retract Button Bit Specification
| R32 Retract Button Bit | ||||||||
| Diameter | Buttons and Size (mm) | Flushing hole | Weight | Part Number | ||||
| mm | inch | Front | Gauge | Angle | front | Side | kg | |
| Spherical | ||||||||
| 45 | 1 7/9 | 3×8 | 6×9 | 40° | 3 | - | 1.1 | 4148300521 |
| 48 | 1 8/9 | 3×9 | 6×10 | 30° | 3 | - | 1.2 | 4148300522 |
| 51 | 2 | 3×9 | 6×10 | 30° | 3 | - | 1.4 | 4148300523 |
| 64 | 2 1/2 | 3×10, 1×10 | 6×11 | 35° | 3 | - | 2.2 | 4148300524 |
| 64 | 2 1/2 | 4×10 | 8×10 | 40° | 2 | - | 2.2 | 4148300525 |
| 76 | 3 | 4×11, 1×11 | 8×11 | 35° | 4 | 1 | 3.5 | 4148300526 |
| Ballistic | ||||||||
| 45 | 1 7/9 | 3×8 | 6×9 | 40° | 3 | - | 1.1 | 4148300527 |
| 48 | 1 8/9 | 3×9 | 6×10 | 30° | 3 | - | 1.2 | 4148300528 |
| 51 | 2 | 3×9 | 6×10 | 30° | 3 | - | 1.4 | 4148300529 |
| 64 | 2 1/2 | 3×10, 1×10 | 6×11 | 35° | 3 | - | 2.2 | 4148300530 |
| 64 | 2 1/2 | 4×10 | 8×10 | 40° | 2 | - | 2.2 | 4148300531 |
| 76 | 3 | 4×11, 1×11 | 8×11 | 35° | 4 | 1 | 3.5 | 4148300532 |
Applications
Used in small hole drilling.
KSQ Related Rock Drilling Tools
(1) Integral Drill Rod– chisel bit integral rod and plug hole integral drill steel,
Shank H19 x 108mm and H22 108mm.
(2) Tapered Rock Drill Tools - chisel bit, cross bit, button bit, drill rod of taper 7, 11, 12 degree
(3) Threaded Rock Drill Tools - button bit, retrac button bit, drop center button bit, dome bit, reaming bit,extension rod, MF-Rod, Hex rod, coupling sleeve, crossover coupling of thread R25, R28, R32, R38, T38, T45, T51, ST58, ST68.
(4) Shank Adapters (Striking Bars) - equivalent to Atlas Copco, , Furukawa, Gardner Genver, Ingersoll Rand etc.
(5) Down-the-hole (DTH) Bits& Hammers - 3'', 4'', 5'', 6'', 8'' hammer and DTH button bit (diameter 80mm - 305mm)
Other products: Tricone bits, PDC bits, self- drilling hollow anchor bar etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.