Water Well RC Reverse Circulation Down Hole Hammer Deep Exploration Drilling
Well Drilling Use RC Reverse Circulation DTH Hammers and drill bit ,
Deep Exploration Drilling
RC series reverse circulation DTH hammer is the latest developed product of our company. It is mainly used for deep exploration drilling and core sampling.
Reverse Circulation RC DTH Drill Bit
RCseries reverse circulation DTH Hammer is the latest developed product of our company. It is mainly used for deep exploration drilling and ore grade control.
It has the following characteristics:
1.Based on previous experience of ordinary hammers, combined with the features of reverse circulation hammer, optimized internal structure and ideal energy transfer, thus ensuring the series of hammers drilling with fast, smooth and continuous sampling.
2. The internal structure is very simple with components of high rigidity, thus ensuring long life and easy maintenance of the hammer.
3.The collection tube adopts an integrative design and can be replaced without disassembling the hammer. With carburizing treatment, it has good abrasive resistance.
4.Equipped with bits designed with patent. Simply by replacing the drill bit, the same hammer can drill holes of different sizes ensuring that the sample is not contaminated.
5. In difficult conditions such as loose soil, hard rock and plenty of water exists, sampling can be done well.
Reverse Circulation Hammers Specification:
| Reverse Circulation Hammers | ||||
| Description | Weight(kg) | |||
| RC45 | RC55 | RC65 | RC52 | |
| 1. Internal Circlip | 0.03 | 0.04 | 0.05 | 0.04 |
| 2. Air Screen | 0.35 | 0.44 | 0.65 | 0.44 |
| 3. Top Sub | 6.50 | 9.65 | 20.00 | 9.65 |
| 4. "O" Ring | 0.01 | 0.02 | 0.02 | 0.02 |
| 5. Sample Tube | 5.10 | 6.72 | 12.50 | 6.75 |
| 6. Check Valve | 0.25 | 0.68 | 0.85 | 0.68 |
| 7. Spring | 0.04 | 0.12 | 0.10 | 0.12 |
| 8. "O" Ring | 0.01 | 0.02 | 0.02 | 0.02 |
| 9. Air Distributor | 0.85 | 1.48 | 3.50 | 1.48 |
| 10. "O" Ring | 0.02 | 0.01 | 0.02 | 0.01 |
| 11. Internal Cylinder | 2.20 | 4.12 | 4.20 | 4.12 |
| 12. Piston | 8.50 | 16.90 | 24.00 | 16.90 |
| 13. External Cylinder | 14.50 | 19.50 | 32.00 | 21.50 |
| 14. Guided Sleeve | 1.20 | 0.90 | 5.50 | 1.90 |
| 15. "O" Ring | - | - | - | 0.02 |
| 16. Stop "O" Ring | - | - | - | 0.01 |
| 17. Stop Ring | - | - | - | 0.32 |
| 18. Shrout | - | - | - | 1.86 |
| 19. Drive Chuck | 3.20 | 5.65 | 6.50 | 4.17 |
| 20. Bit Retaining Pin | 0.01 | 0.15 | 0.30 | - |
| 21. Drill Bit | 10.50 | 15.80 | 31.00 | 11.05 |
| Technical Data | ||||
| Model | RC45 | RC55 | RC65 | RC52 |
| Length (Without Bit) | 1020mm | 1111mm | 1250mm | 1208mm |
| Weight (Without Bit) | 94.00kg | 66.50kg | 110.00kg | 70.00kg |
| External Diameter | φ99mm | φ126mm | φ146mm | φ126mm |
| Bit Shank | NRC45 | NRC55 | NRC65 | PR52 |
| Hole Range | φ114 - φ127mm | φ133- φ152mm | φ155- φ190mm | φ133- φ146mm |
| Connection Thread | As required | As required | As required | As required |
| Working Pressure | 1.0 - 3.0 Mpa | 1.5 - 3.5 Mpa | 1.5 - 3.5 Mpa | 1.5 - 3.5 Mpa |
| Impact Rate at 17 Bar | 30HZ | 35HZ | 28HZ | 35HZ |
| Recommended Rotation Speed | 25 - 40 r/min | 25 - 40 r/min | 25 - 40 r/min | 25 - 40 r/min |
| Air Consumption | 1.0Mpa: 8 m³/ min | 1.7Mpa: 16 m³/ min | 1.7Mpa: 20 m³/ min | 1.7Mpa: 16 m³/ min |
| 1.8Mpa: 12 m³/ min | 2.4Mpa: 22 m³/ min | 2.0Mpa: 26 m³/ min | 2.4Mpa: 22 m³/ min | |
| 2.4Mpa: 16 m³/ min | 3.0Mpa: 28 m³/ min | 3.0Mpa: 35 m³/ min | 3.0Mpa: 28 m³/ min | |
|
HAMMER INCH
|
BIT DIA(MM)
|
BIT DIA(INCH)
|
SHANK
|
|
1
|
64MM-76MM
|
2 1/2"-3"
|
BR1
|
|
2
|
76MM-90MM
|
3"-3 1/2"
|
BR2/PAD320
|
|
3
|
85MM-105MM
|
3 2/5"-4"
|
BR3/DHD330/COP32/PAD330
|
|
3.5
|
85MM-110MM
|
3 2/5"-4 1/3"
|
DHD3.5/IR3.5/COP34/QL30/PAD3.5
|
|
4
|
105MM-140MM
|
4"-5 1/2"
|
DHD340/COP44/QL40/SD4/MISSION40/PAD340
|
|
5
|
127MM-200MM
|
5"-8"
|
DHD350/COP54/QL50/SD5/MISSION50/PAD350
|
|
6
|
152MM-254MM
|
6"-10"
|
DHD360/COP64/QL60/SD6/MISSION60/PAD360
|
|
8
|
195MM-350MM
|
7.2/3"-13 4/5"
|
DHD380/COP84/QL80/SD8/MISSION80/PAD380
|
|
10
|
254MM-380MM
|
10"-15"
|
SD10/NUMA100/DHD1100/PAD1100
|
|
12
|
305MM-457MM
|
12"-18"
|
SD12/NUMA120/DHD1120/PAD1120
|
Applications
1. Mine and quarry
2. Road construction for the drilling and blasting work
3. Water well drilling
4. Slope protection
KSQ Related Rock Drilling Tools:
MIROC® Rock Drilling and Ground Support Tools include:
Integral Rods
Plug Hole Rods
Tapered Drilling Tools
Extension Drilling Tools
Drifting and Tunneling Tools
Reaming Tools
Shank Rods
Shank Adapters (Striking Bars)
Down-the-hole (DTH) Bits
Down-the-hole (DTH) Hammers
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.