Stainless Steel IEC Testing Equipment Circuit Breakers Tripping Characteristic Test Apparatus
IEC 60898-1Testing Equipment Circuit-breakers Tripping Characteristic Test Apparatus
Product Introduction:
The circuit breaker thermal trip tester complies with IEC 60898-1.
It is a circuit breaker delay, standard (long delay) operating characteristics test stand.
Standard:
IEC 60898-1 Electrical accessories - Circuit-breakers for overcurrent protectionfor household and similar installations -Part 1: Circuit-breakers for a.c. operation clause 8.6 Automatic operation, and clause 9.10 Test of tripping characteristic;
Parameters:
| Total capacity (KVA) | 20KVA |
| Power input wire diameter (mm²) | ≥16 |
| Output current (A) |
A total of 5 channels, respectively, as follows. 3 channels (the station can meet the current output 10-300A at the same time). 2 channels (the station can meet the current output 100-1000A at the same time). |
| Working power |
Voltage: AC 220V±10%; three-phase four-wire Frequency: 50±1 |
| Current display with constant current accuracy | ≤±1% Adopt high precision electronic source |
| Current waveform distortion | ≤3% |
| Insulation resistance | ≥10MΩ |
| Timing resolution (S) | 0.1 |
| Timing range (S) | 0.1—99999 |
| Maximum allowable error of the system | ±1% |
| Heater | Ensure the test chamber temperature up to 60℃, digital display |
| Result indication | Indicates the samples results on the touch screen, if accepted or rejected in the screen. |
The picture of the operation interface:
This picture shows the screen and the button. The screen can clearly display the test data, which is convenient for the tester to observe and record.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.