Fully Auto IEC Test Equipment Electric Water Kettle Testing Machine With PLC Touch Screen Control
 
 
Product information:
The electric water kettle tester is designed and manufactured according to IEC 60335-2-15 clause 19.101, 19.102, 22.103 and etc.
It is suitable for comprehensive lifespan testing of various types of conventional cordless electrothermal kettle, complete simulation of artificial water boiling mode.
The whole without staff care, failure alarm.
Each station configured independently, without mutual interference. Very low fault rate.
 
Basic functions:
Contains five functions: dry heating (self-cooling), dry heating (water cooling), withdraw (without current), withdraw (with current), cyclic boiling water.
1.  Dry heating (self-cooling): start--kettle pouring-kettle back to origin-- dry heating end (temperature controller jumped) --natural cooling to the thermostat reset -- cyclic dry heating
2.  Dry heating (water cooling):
Start -- kettle pouring -- began to dry heating -- dry heating end (thermostat trip)--water cooling to the thermostat reset (water volume adjustable) -- kettle pouring-- cyclic dry heating kettle;
3.  Withdraw (without current): Start -- began to withdraw (cycle work);
4.  Withdraw (with current): Start -- injecting water (water volume adjustable) -- withdraw (with current) -- cycle work--change the water interval (can be set times) -- cycle work;
5.  Cyclic boiling water: Start--kettle pouring-kettle back to origin--injecting water (can set the injection water volume)--heating and boiling water--after the water is boiled (thermostat trip)--kettle pouring --kettle back to origin--cycle work.
 
Control system:
Use PLC and touch screen control system, operation is stable, maintenance is simple and convenient.
The parameter setting and each station working state information can be controlled and displayed on the touch screen.
With independent design life detection board to monitor products working state, alarm occurs when there is abnormal and fault.
The equipment can automatically count, the test times can be set, when it reaches to the preset value, the equipment will stop working.
 
Main control parameters:
1) Water pouring time: 1~9999(s) adjustable; kettle back to origin time: 1~9999(s) adjustable
2) Water injection time: 1~9999(s) adjustable; cooling time: 1~9999(s) adjustable
3) Withdraw conduction time: 1~9999(s) adjustable; withdraw break off time: 1~9999(s) adjustable
4) Rest set: 1~9999(times) adjustable; rest time: 1~9999(s) adjustable
5) Test times: 1~9999(times) adjustable; actual counting times: 1~9999(s) adjustable
 
Main techinical parameteters: