IEC 60884-1 Figure 21 Power Cord Flexing Tester With 6 Sets Of Clamps
IEC 60884-1 figure 21 Power Cord Flexing Tester With 6 Sets Of Clamps
Product Introduction
The plug cord flexibility test apparatus is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21, which is used to process the bending test for the power cord of non rewirable plugs, appliances and similar electrical appliances (electric tools).
The device can be preset test times (up to 999999), it can carry out the test and calculate of the numbers of tests automatically. When the test times reach to the preset value, the system will shut down automatically and completion signals sound. Once the test apparatus connects to external load, it can be used to process test with load.
Technical Parameters
| Power Supply | AC220V, 60Hz (can customed by the customer) |
| Numbers of Test Stations | 6, With 6 Sets Of Clamps |
| Numbers of flexing times | 1-999999 (adjustable). With 6 independent counters corresponding to each station, and there is a general counter |
| Rate of Flexing | 10~60 rpm (adjustable) |
| Flexing Angles | Swivel angle on either side for 45°, 60°, 90° |
| Sample connecting wires | 6 PCS |
| Weights | 10N/20N*6(the weight of UL113g and 284g) |
| Breaking indication | Indicator display |
| Dimensions | L*W*H=870mm *610mm* 820mm |
| Conforms to standard | IEC884-1 Figure 21 and clause 23.4, IEC320-1, VDE0620 |
|
Mechanical theory |
The crank block on the reduction gearbox is driven by the electric motor to do the reciprocating action. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.