IEC60335-2-5 Dishwasher Internal Wiring PLC Control Single Station Flexible Tester With Load Voltage Adjustable

Product information 

The tester is designed and manufactured according to IEC 60335-2-5 household and similar electrical appliances – safety: part 2-5: particular requirements for dishwashers, clause 23.3; EN 60335-2-7 clause 23.3; IEC 60335-1 clause 23.3, It is used to test whether the internal wiring of the dishwasher door has sufficient bending resistance under the action of the repeated opening and closing door, or whether the protective layer is sufficient to resist the interference of the relative movement of other components without damage to verify the reliability of the internal wiring; Used to assist other tests for repeated door opening and closing actions.

Test principle 

The edited program is used to control the robot arm driven by the motor to drive the door or the lid sucked by the vacuum suction cup to reciprocate at a certain speed, thereby verifying the reliability of the internal wiring.

Test sample

Electric dishwasher, (single phase ≦ 250V), Maximum sample size allowed WDH=600*600*850mm

Structure

The equipment consists of an electrical control cabinet (including load voltage regulator), a frame and a robot arm mounted on the frame.

Equipment dimensions: about: 1500 × 1300 × 1300 (mm) W × D × H

Equipment weight: 180kg

Performance parameters :

Use environment

Power supply: AC220V±10%/50-60Hz, power 6KW

Air source: 0.5-0.7MPa compressed air

Use place: atmospheric pressure 80 ~ 106kpa; ambient temperature 5 ~ 40 ° C; relative humidity (20 ~ 80)% RH; no vigorous shaking, vibration, no electromagnetic interference, no dust, no explosive and corrosive gas, good heat dissipation.