IEC 60065 Test Probe C 2.5mm Diameter 100mm Length For Hazardous Live Test
IEC 60065 Test Probe C 2.5mm Diameter 100mm Length for HAZARDOUS LIVE TEST
IEC60065-2014 Clause 9.1 .5 Pre-set controls
If a hole giving access to pre-set controls is marked as such on the enclosure or in the instruction for use, and the setting of this control requires a screwdriver or other tool, the adjustment of the control shall not involve the risk of an electric shock.
Compliance is checked by applying to the opening a test probe according to IEC 61032:1997, test probe C.
The test probe is applied in every possible position, in case of doubt with a force of 10 N ± 1 N.
The test probe shall not become HAZARDOUS LIVE. Test Finger Probe
Standard:IEC61032 figure 3 and IEC60529 for IP3 and IEC60065.
Application:This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a tool. Test Finger Probe
Test sample:Easily accessible enclosure live parts or mechanical parts.
Feature:It can be used for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) . Test Finger Probe
Parameters:
| Model | HT-I03 | HT-I03T |
| Name | Test rod probe C | Test rod probe C with force |
| Probe diameter | Ф2.5+0.05 0 | Ф2.5+0.05 0 |
| Sphere diameter | SФ35±0.2 | SФ35±0.2 |
| Handle diameter | Ф10 | Ф10 |
| Probe length | 100±0.2 | 100±0.2 |
| Handle length | 100 | ---- |
| Force | ---- | With force of 3N |
| Applied standard | IEC61032.1 | IEC60529 |
Picture for reference:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.