IEC60335-2-6 Clause 21.102 Vessel For Dropping Test - Hotplates Dropping Aluminum Plate
IEC60335-2-6 clause 21.102 Vessel For Dropping Test - Hotplates dropping aluminum plate
Standard: This device meets the standard of IEC 60335-2-6 clause 21.102 and IEC60335-2-9 clause 21.101,Household and similar electrical appliances-Safety-Part 2-9:Particular requirements for grills, toasters and similar portable cooking appliances.
Application: It is used for testing the surfaces of hotplates of glass-ceramic or similar material shall withstand the stresses liable to occur in normal use.
Test sample:Hotplates of glass-ceramic or similar material. Electrical Appliance Tester
Features:Making of pure aluminum, with lid, prevent sand leakage. The hotplate is operated at rated power input with its control adjusted to the highest setting. Induction hotplates are operated as specified in Clause 11. When steady conditions are established, the hotplate is switched off and a vessel has a copper or aluminum base that is flat over a diameter of 120mm±10mm, its edges being rounded with a radius of at least 10mm. It is uniformly filled with at least 1.3kg of sand or shot so that the total mass is 1.80kg±0.01kg.
The vessel is dropped 10 times onto each cooking zone. It is removed and the appliance is operated at rated power input until steady conditions are established. Electrical Appliance Tester
Parameters:
| Item name | Hotplates dropping aluminum plate |
| Material | Aluminum |
| Base flat diameter | 120mm±10mm |
| Edges rounded | R10 |
| Weight | 0.5kg Electrical Appliance Tester |
| Mass of the sand | More than 1.3g (dropping total weight:1.8±0.01kg) |
| Dropping height | 150mm |
| Dropping times | 10 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.