IEC 60884-1 Load Box For Power Cord Flexing Tester 6 Stations 0 - 40A Adjustable
IEC 60884-1 Load Box For Power Cord Flexing Tester 6 Stations 0 - 40A Adjustable
Standard: IEC 60884-1 2013 clause 23.4 and UL817, VDE0620
Application: This device is used for test the flexing properties of non-rewirable plugs (terminals) and non-rewirable portable socket-outlets with power cord flexing tester. Plug Socket Tester
Test sample: Non-rewirable plugs and non-rewirable portable socket-outlets
Feature: The box type floor structure is adopted, provide 6 channels of low voltage and high current output.
Parameters: Plug Socket Tester
| Input voltage | AC220V±5%, 60Hz |
| Output current | 0 ~ 40A is arbitrary adjustable |
| Output voltage | 0 ~ 280V |
| Test station | Six stations |
| Ammeter Accuracy | ±1％ |
| Connecting wire | 7PIN Aviation wire |
| Environment temperature | -10℃~50℃ |
1. The load output voltage is not safe voltage, prohibit disconnecting the test samples under load voltage.
2. There are test voltage between different load output, please prevent electric shocking.
3. The naked test lines should not touch the test equipment housing, to prevent short circuits caused by the accident.
4. Power supply must have a good grounding protection. Plug Socket Tester
5. The current and voltage regulation should be processed slowly, do not too fast.
6. The non-professionals or non-untrained personnel should not operate this equipment.
7. The test machine should be placed in ventilation environment, ensure that at least 10cm far away from the wall.
8. Unauthorized change the internal structure of the instrument will be considered as a waiver of the warranty rights.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.