IEC60065 Figure 8 Steel Ball Impact Test Apparatus Drop Height 0.5-1.5m Adjustable

IEC60065 Figure 8 Steel Ball Impact Test Apparatus, Drop Height 0.5-1.5m Adjustable

Moreover, the non-ventilated solid areas of the enclosure that protect HAZARDOUS LIVE parts shall be subjected to a single impact, specified in Table 6.
The impact specified in Table 6 shall be caused by allowing a solid, smooth, steel ball of (50 ± 1) mm in diameter and with the mass of approximately 500 g to fall freely from rest through a vertical distance, as illustrated in Figure 8, and strike the enclosure with the specified impact in a direction perpendicular to the enclosure surface.                     Audio Video Test Equipment

Standard: IEC 60950-1 Clause 4.2.5, IEC 60598-1 Clause 4.13.4a), IEC 60065                            Audio Video Test Equipment

Application: This device is suitable for drop impact test for equipment enclosure.

Test sample: Luminaries, Audio, video and similar electronic apparatus, Information technology equipment

Feature: Equipment can carry out test in two forms of vertical drop and swing impact

Parameters:                                           Audio Video Test Equipment

• Impact steel ball: diameter 50mm, 500±25g
• Drop height: 0.5-1.5m adjustable
• Lift mode: Electric
• Clamping release mode: electronic control                                               Audio Video Test Equipment

• Impact steel ball	diameter 50mm, 500±25g
  Drop height	0.5-1.5m adjustable
  Lift mode	Electric
  Clamping release mode	electronic control

   

Picture for reference: