Dsp Laser Control Card 4 Db9 Sockets For 3d Marking / Rotary Marking
Quick Detail:
DLC2-M4 board have 4 DB9 sockets for extend axis ;
Work with DLC2 board and EZCAD3 software to make 4 axis move at a same time;
Can select Common anode (TTL) output or Differential output by switch;
powered by DLC-2.
Description:
DLC-2 board is a new generation products that have more powerful control functions and adopt new communication modes make it response more faster, more accurate and more stable.
DLC-2 Motion Control Board works with DLC-2 and EZCAD3 software and can output 4 Direction/Pulse signal. Up to 4 Axis can be controlled. User can connect axis and mark with EZCAD3 for 3D marking ,large format procession and rotate marking.you can achieve more complex process and get better effect .
The Motion Control Board can be directly connected with DLC-2 through J7(Pin 40 )and powered by DLC-2. one M4 board will resolve so many technical problems and it is just a small board .
Applications:
4 axis movement control
3D marking and rotary marking
Specifications:
The Pin definition of J1/J2/J3/J4 as follows:
| pin | name | Description |
| 1 | VCC | 5V Output |
| 2,6 | Pulse-/+ |
Pulse Signal Output, Support Differential signal output or Common anode(TTL) output |
| 3,7 | Direction-/+ |
Direction Signal Output Support Differential signal output or Common anode(TTL) output |
| 4 | Right limit | Reserved |
| 8 | Left limit | Reserved |
| 9 | Origin Signal | Origin Signal Input(TTL) |
| 5 | GND |
Competitive Advantage:
DLC2-M4 board have 4 DB9 sockets for extend axis .
Work with DLC2 board and EZCAD3 software to make 4 axis move at a same time
Can select Common anode (TTL) output or Differential output by switch
powered by DLC-2.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.