Wood Marking Laser Cutter Control Board 16 General Input Signals Design
Wood Marking Laser Cutter Control Board 16 General Input Signals Design
| CON3: DB9 flying standard interface | ||
| Pin. | Name | Description |
| 1 | IN8 | Input port 8 |
| 2,6 | IN9+,IN9- | Input port 9 positive |
| 3,7 | BCODEP/ BCODEN | Input port 9 negative |
| 4,5 | ACODEP/ACODEN | Encoder input B+/B- |
| 8 | VCC | +5V output |
| 9 | GND | Ground |
Features:
1. 16 general input signals (TTL compatible): In0-In13, XORG0(IN14), YORG0(IN15).
2. 8 general output signals (TTL compatible): Out0-7 coming out of Con5. Out0-3 are TTL outputs. Out4-7 can be configured as OC outputs or TTL outputs.
3. Laser Err signal: this signal will be activated when there is an error occurs in the laser, OC output.
4. Remark function: this function is used to remark what ever is in the memory f the board, especially conveient for high speed marking on same pattern.
5. Compatible with USB2.0 specifications.
6. 16 general input signals (TTL compatible), 8 general input signals (TTL compatible)
7. Using USB2.0 specifications
Applications:
| Model | CO2 |
| Connect Method | USB2.0 |
| Galvo control signal | Can be directly connected to a universal digital galvao |
| Number of Input Ports | 16 universal input ports |
| Number of Output Ports | 14 way TTL/ OC |
| Remark Signal | Cache content repeated engraving |
| Extended Axis | Support for 2 extension axis |
| Flight Marking | Support |
| Multi-head Carving | Support |
| Software Second Development | Support |
| Suitable Laser | CO2 / YAG / UV Laser |
| Applicable Material | Glass, Plastic, Wood, Rubber, Paper |
| Support Operating System | XP WIN7 WIN8 WIN10 32/64 Bit System |
| Built-in Encryption Chip | Support |
| Power Supply | 5V 3A |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.