Air Circulation Aging Environmental Test Chamber High Temperature
High Temperature Aging Chamber
1.Product Name:High temperature aging chamber
2.Product Model:GX-3010-A
3.Description:
Hanging on the sample shelf, the sample was heated under the preset temperature. Take out the sample and measure the line distance after the recovery under normal temperature. Then make comparison between the data before and after the test. Furthermore, the tensile strength, elongation and the residual rate can also be calculated out.
4.Test principle:
The in-built forced air circulation supply, from the wind wheel to the heater, through the wind road until to the test chamber, can be used to ensure the minimum energy loss and temperature uniformity. The air circulation can help alleviate the temperature loss caused by the opening and closings doors.
5. Technical Parameter:
|
Interior box |
40 ×40×45cm, can be customized |
|
Max temperature |
RT～200℃or300℃ |
|
Rising time |
RT to 200℃ , 45 minutes |
|
Temperature accuracy |
0.1℃ |
|
Temperature fluctuation |
±0.5℃ |
|
Temperature uniformity |
±2℃ |
|
Heating method |
Hot wind circulation |
|
Insulation layer |
Efficient compression glass wool |
|
Sample shelf rotation speed |
5~10rpm |
|
Electric heating |
3KW |
|
Motor power |
1/4HP |
|
Interior box material |
SUS＃201stainless steel with depth of 1.0 mm |
|
Outside box material |
A3 painted cold-rolled sheet with depth of 1.5mm |
|
Draught flue |
Vane design, adjustable |
|
Control method |
Automatic control with alarm( The timer would start when the preset temperature is arrived and the power supply would be cut off ) |
|
Volume |
91×55×99cm |
|
Weight |
87kg |
|
Power supply |
1∮,220V,15A |
6. Product Picture
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.