Paperboard Ring Crush Compression Resistance Tester Paper Testing Instruments
Paper ring crush compression resistance tester
1. Product Name:Ring-crush strength equipment
2. Product Model:GX-6030-A
3. Description:The equipment can display the sample strength by the software analysis from the data collected by precise sensor. It is applicable to corrugating medium paper and brown paper with the thickness less than 1mm. With the help of various tools, this equipment can be used to test the vertical strength, erect strength, glue strength and flat crush strength.
4. Test principle:Put the sample into the interval between the two flat platens and add the speed and pressure to the sample. When compressed by the lower platen, the upper platen would be crushed and the sensor can get the pressure and change it into electrical signals to display.
5. Test standard: TAPPI-T472,JIS-P8126,GB/T2679.9
6. Technical Parameter
| Sensor method | LOAD CELL force sensor |
| Capacity | 200KG |
| Unit change | Kg/N/Lb |
| Resolution | 1/10000 |
| Test speed | 12.7mm/min (speed adjustable) |
| Accuracy | ±1% |
| Compression board | 100×100 mm or customized by the sample |
| Valid interval | 150mm |
| Volume | 45×35×67mm |
| Power | 1∮,220V 1.5A(Or specified by user) |
| Weight(approx) | 92kg |
| Note: Standard ring-crush and edge crush fixtures are equipped along with the machine.(Press cutter is excluded) | |
7. Product Picture
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.