Remote Computer Control Perpendicular Puncture Battery Testing Equipment For SAE J2464
10 Ton Remote Computer Control Perpendicular Puncture Battery Testing Equipment for SAE J2464
Product Description:
The testing machine is used for the battery penetrating test by simulating the acupuncture by sharp objects when pack, transport, reserve, use and dispose batteries. The result of the test can be used to evaluate the safety performance of the battery.
Acupuncture test method:
Single Battery: Use the High temperature Resistance steel needle At a speed of (25 ± 5) mm / s, from the direction perpendicular to the battery plate, the penetration position should be close to the geometric center of the surface, the steel needle stays in the battery, observe 1 hour(Diameter of the needle is Φ5mm ~ Φ8mm, The taper angle of the needle tip is 45°~60°, the surface of the needle is smooth, free from rust, oxide layer and oil stain.)
Modular accumulator:
Use the High temperature Resistance steel needle At a speed of (25 ± 5) mm / s, from the direction perpendicular to the battery plate, the penetration position should be close to the geometric center of the surface, at least Pierce through 3 single battery, the steel needle stays in the battery observe 1 hour(Diameter of needle is 6mm ~ Φ10mm, The taper angle of the needle tip is 45°~60°, the surface of the needle is smooth, free from rust, oxide layer and oil stain.)
Product Specifications:
| Drive | Hydraulic drive | |
| Max capacity | 80T(or customized) | |
| Load sensor | High precision load sensor with the resolution of 1/10,000 | |
| Display accuracy | ±10.0kg | |
| Unit | kgf ,lbf ,N, KN, Kpa, Mpa | |
| Puncture | Stroke | 500mm(adjustable, can customize) |
| Speed | 10—40mm/s | |
| Steel needle | Diameter of 3mm to 8mm | |
| Distance between the needle and the sample | 300mm(or customized) | |
| Clap distance | 500mm(or customized) | |
| Clap method | Manual clamping,or fixture customized | |
| Structure | Box material |
Interior box: SUS#304 stainless steel Outward box:cold-roll steel sheets with paint |
|
Observing window |
300*300mm,depth of 10mm | |
| Ventilation facility | exhaust fan with diameter of 150mm, exhaust pipe can connect to exhauster | |
| Safety device | Separate the control box and test box. | |
| Light | High-brightness light | |
| Power | 380V , 50~60HZ,10A | |
Reference standard:
GB/T 31485-2015 Safety requirements and test methods for traction battery of electric vehicle
QC/T 741-2014 Ultra-capacitor for electri vehicles
QC/T 742-2006 Lead-acid batteries for electric vehicles
QC/T 743-2006 Lithium-ion batteries for electric vehicles
QC/T 744-2006 Nickle-metal hydride batteries for electric vehicles
Picture:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.