Anti Static Testing Equipment Of The Button Type AKRON Abrasion Performance Footwear Testing Equipment BS903 Standard

1. Product Name:AKRON Abrasion Tester

2. Product Model:GX-5014

3. Product Application: The testing machine is used to test the abrasion resistance of rubber products like shoes sole, tires and track chariot with the help of balance. The automatic electronic counter can set the rotation times and stop automatically.

4. Test Standard:BS903,GB/T1689,CNS734,JIS-K6264

5. Product Structure:

1. Control Panel

2. Weight plate : place weights

3. Balancing pole

4. Copper brush : clean dust on the wheel

5. Wheel : rub sample

6. Fixing nut (Sample )

7. Fixing nut ( hammer )

8 . Motor: drive machine running

9. Specimen holder clip : place the sample

10. Hammer: for adjustments to make the wheel in balance.

11. Pointer angle : angle indicates the sample angle , the more general   test is   scheduled to 15

12. Dial: with indicator pin indicates the angle scale.

13. Angle of the screw: Resize inclination of the test specimen

6. Technical Parameter

7.Notes:

(1) Test sample : Diameter of 60.5mm, Inner diameter of 11.5mm, Thickness of 13mm, Perimeter of 220mm, Hardness of 60 to 70 ( the outer diameter of 2 " , an inner diameter of 1/2" thickness 1/2 " , perimeter 220mm, hardness 60-70 )

(2) Wheel: Diameter 150mm (W) 25mm, granularity # 36 , combination of P, the center hole 32mm, the abrasive is aluminum oxide

(3) Sample tilt range: 0 ~ 45 ° (test angle 15 °)

(4) Sample shaft speed : (BS) 250 ± 5r / min (GB) of plastic axle 76 ± 2r / min wheel speed 34 ± 1r / min

  (5) Configurations: Test machine and two standard weights