DC12V/7W Net Weight 1.1kg Wall-Mounted Small Area Electric Room Fragrance Diffuser

Parameter:

Introduction:

DSQ2010C is a stand alone design for middle area. With a Fan inside the model, it can diffuse fragrance directly,so that make the aroma spray through the whole space quickly.It uses long lifespan Japanese pump, which can last for more than 8000 hours.

Connect to power adapter:

    Connect to power adapter with power socket and [DC POWER IN] on device. The [ON / OFF] LCD displays the system’s time and the machine if in operation state or not. [ON] shows the Aroma Diffuser is in operation state, [OFF] is out of operation state . The [WORK / PAUSE] displays the machine in work / pause status.

PCB control setting:

The fragrance device is to be see 4 work periods, also can be allowed to choose the workdays according to users’ requirements.

[MODE]: to change from one event to another in different work/pause periods.

[SET]: for work /pause time setting (hour,minutes), work days and so on.

[UP/DOWN]: slide it to adjust the time data, scent concentration data and workdays.

Set the system time:

Adjust the system time to be in accordance with the local time, the time is 24-hours system.

• Press [SET] for the first time , the hour figure flash, press [UP/DOWN] to adjust the hour.

• Press [SET] for the second time, hour setting ends and minute figure flash, press [UP/DOWN] to adjust the minute.
• Press [SET] for the third time,minute setting ends, the work day figure flash, press[UP/DOWN] to adjust the work days.
• Press [SET] for the fourth time, the system time and work day setting ends.

 Set the operation periods:

• Press [MODE] for the first time,LEC screen displays [EVENT 1 ON], press [SET] to adjust the first operation period. Press [UP/DOWN] to adjust the hour, minutes and workdays. We set the hour first, then minutes and work days. (Repeat the operation from [SET] to [UP/DOWN] to set the other work periods.)
• Press the [MODE] for the second time, LCD screen displays MONTUE WED THU FRI SAT SUN, Press [UP/DOWN] to adjust the workdays group.