JIS G 3460 Round Carbon and Nickel Steel Pipe For Low Temperature Service
Torich International Co.,Ltd is specialized in manufacturing and suppying JIS G 3460 Carbon and Nickel Steel Pipe for low temperature service
JIS G 3460 Steel Tube Size range:
OD: 5-420mm
WT: 0.5-50mm
Length: Upon request
JIS G 3460 Nickel Steel Pipe Application: for low temperature service
JIS G 3460 Nickel Steel Tube Shipment:
FCL, LCL workable. Bulk Vessel workable By Air, By Sea, by Courier
| CHEMICAL COMPOSITION % max | ||||||
| Steel grade | C | Si | Mn | P | S | Ni |
| STPL 380 | 0.25 | 0.35 | 1.35 | 0.035 | 0.035 |
|
| STPL 450 | 0.18 | 0.10-0.35 | 0.30-0.60 | 0.030 | 0.030 | 3.20-3.80 |
| STPL 690 | 0.13 | 0.10-0.35 | 0.9 | 0.030 | 0.030 | 8.50-9.50 |
Remarks:
When it is practically difficult to apply the test due to the dimension of a pipe,STPL 380 shall , by way of compensation,contain 0.01% or more of acid soluble aluminum, or alternative,0.015% or more of total aluminum.
| MECHANICAL PROPERTIES min | |||
| Steel grade | Tensile strength Mpa | Yeild point or proof stress Mpa | Elongation % |
| STPL 380 | 380 | 205 | 35 |
| STPL 450 | 450 | 245 | 30 |
| STPL 690 | 690 | 520 | 21 |
Remarks:
1.The value of elongation given in above table shall not be apply to the pipe whose outside diameter is under 40mm,However, the value of elongation shall be recorded.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.