ASTM A847 Cold Drawn Seamless Low Alloy Square/Rectangular Structural Pipes

Size range: O.D.: 6-813mm W.T.:1-12.7mm L: according to customer requirement

Steel Grade and Chemical Compositions:

Mechanical Properties:

Manufacture:

Tubes are made by seamless process.

The tubing may be stress relieved or annealed, as is considered necessary by the tubing manufacturer, to conform to the requirements of this specification.

Tolerance:

Straightness--The permissible variation for straightness of structural tubing shall be 1/8 in times the number of feet (10.4mm times the number of meters) of total length divided by5.

Squareness of sides— For square and rectangular structural tubing, adjacent sides may deviate from 90° by a tolerance of ±2° maximum.

Radius of Corners— For square or rectangular structural tubing, the radius of any outside corner of the section shall not exceed three times the specified wall thickness.

Workmanship, Finish, and Appeaerance:

All tubing shall be free from defects and shall have a workmanlike finish.

Surface imperfections shall be classed as defects when their depth the remaining wall thickness to less than90% of the specified nominal wall thickness.

Test and Inspection:

• Mechanical Test
• Tension Test
• Flattening Test
• Hardness Test