Forged GB/T 2965 Titanium Alloy Rod with High Strength-to-Weight Ratio and Corrosion Resistance in Custom Lengths
Price:
USD 1000-1300 Per Ton
MOQ:
30 Kilogram/Kilograms
Delivery Time:
15-30 days
Brand:
TORICH
Product Description
Forged Mechanical GB/T2965 Titanium Alloy Rods
Forged mechanical GB/T 2965 titanium alloy rods are round or rectangular titanium bars produced by forging and rolling for applications requiring high strength-to-weight ratio, corrosion resistance, and controlled mechanical performance. GB/T 2965 applies to titanium and titanium alloy bars made by forging and rolling, while ASTM B348 covers annealed titanium and titanium alloy bars and billets with required chemical composition and tensile testing requirements.
Product Specifications
| Item | Description |
|---|---|
| Material | Titanium and titanium alloy |
| Main Standard | GB/T 2965 |
| Equivalent / Reference Standards | ASTM B348, JIS H 4650, DIN 17862, GOST 26492 |
| Typical Grades | TA1, TA2, TA9, TC4, TC11 |
| Product Form | Forged rod, rolled bar, round bar, rectangular bar |
| Outside Diameter | 8-60 mm, custom sizes available |
| Wall Thickness | Not applicable for solid rods |
| Length | 1-12 m customizable; common supplied length ≤4000 mm |
| Tolerance Range | According to GB/T 2965 or customer drawing |
| Straightness | Controlled by diameter, length, and final machining requirement |
| Surface Condition | Forged surface, turned, polished, peeled, ground, or bright surface |
| Heat Treatment | Annealed, stress relieved, solution treated and aged where applicable |
| Processing Method | Forged, rolled, machined, straightened |
| Inspection | Chemical analysis, tensile test, dimensional inspection, surface inspection, ultrasonic testing if required |
Main Characteristics
| Property | Technical Description |
|---|---|
| Density | Approximately 4.51 g/cm³ for commercially pure titanium and common titanium alloys |
| Strength Range | From ≥240 MPa tensile strength for TA1 / Grade 1 type material to ≥895 MPa for TC4 / Grade 5 type material |
| Corrosion Resistance | Strong resistance in seawater, chloride-containing environments, many oxidizing acids, and chemical processing media |
| Heat Resistance | TC11-type high-strength titanium alloy can be used for higher-temperature mechanical components compared with commercially pure titanium |
| Weight Advantage | About 40-45% lighter than common carbon steel at comparable component volume |
| Formability | TA1 and TA2 provide better cold and hot formability; TC4 and TC11 provide higher strength but require tighter forging and heat-treatment control |
| Machinability | Requires sharp tools, stable clamping, proper coolant, and controlled cutting speed to avoid work hardening and galling |
Our Advantages
| Professional Concern | Practical Solution |
|---|---|
| Grade equivalence across GB, ASTM, JIS, and GOST | We match GB/T 2965 grades with commonly used international references such as ASTM B348 and JIS H 4650, helping buyers avoid confusion between TA, TC, Grade, and Class designations. ASTM B348 defines titanium bar and billet grades by chemical and tensile requirements, while JIS H 4650 specifies titanium and titanium alloy rods and bars. |
| Chemical composition traceability | Each batch can be supplied with material test certificates showing Ti balance and controlled elements such as Fe, O, N, H, Al, V, Mo, Zr, Pd, and Si according to the ordered grade. |
| Mechanical performance consistency | Forging ratio, heat treatment, straightening, and tensile testing are controlled to support stable yield strength, tensile strength, elongation, and reduction of area for mechanical rods. |
Execution Standards
| Standard | Scope |
|---|---|
| GB/T 2965 | Titanium and titanium alloy bars produced by forging and rolling |
| ASTM B348 | Titanium and titanium alloy bars and billets |
| JIS H 4650 | Titanium and titanium alloy rods and bars |
| DIN 17862 | Titanium and titanium alloy bars and forgings reference standard |
| GOST 26492 | Titanium and titanium alloy rods; includes Russian titanium grades such as VT1-0 and VT6-type materials. |
Application Field
Aerospace fastener blanks -- forged TC4 titanium alloy rods are commonly used to machine high-strength aerospace bolts, pins, and structural connecting parts where low weight, high tensile strength, and corrosion resistance are required.
Chemical Composition
| Grade | Equivalent Reference | C max | N max | H max | O max | Fe max | Main Alloying Elements | Ti |
|---|---|---|---|---|---|---|---|---|
| TA1 | ASTM Grade 1 type | 0.08% | 0.03% | 0.015% | 0.18% | 0.20% | -- | Balance |
| TA2 | ASTM Grade 2 type | 0.08% | 0.03% | 0.015% | 0.25% | 0.30% | -- | Balance |
| TA9 | ASTM Grade 7 type | 0.08% | 0.03% | 0.015% | 0.25% | 0.30% | Pd 0.12-0.25% | Balance |
| TC4 | ASTM Grade 5 type / Ti-6Al-4V | 0.08% | 0.05% | 0.015% | 0.20% | 0.30% | Al 5.5-6.8%, V 3.5-4.5% | Balance |
| TC11 | Ti-6.5Al-3.5Mo-1.5Zr-0.3Si type | 0.08% | 0.05% | 0.015% | 0.15% | 0.25% | Al 5.8-7.0%, Mo 2.8-3.8%, Zr 0.8-2.0%, Si 0.20-0.35% | Balance |
Mechanical Properties
| Grade | Condition | Tensile Strength Rm | Yield Strength Rp0.2 | Elongation A | Reduction of Area Z | Typical Use |
|---|---|---|---|---|---|---|
| TA1 | Annealed forged / rolled bar | ≥240 MPa | ≥140 MPa | ≥24% | ≥30% | Corrosion-resistant machined parts |
| TA2 | Annealed forged / rolled bar | ≥345 MPa | ≥275 MPa | ≥20% | ≥30% | General mechanical and chemical equipment parts |
| TA9 | Annealed forged / rolled bar | ≥345 MPa | ≥275 MPa | ≥20% | ≥30% | Chemical equipment parts requiring improved corrosion resistance |
| TC4 | Annealed forged / rolled bar | ≥895 MPa | ≥825 MPa | ≥10% | ≥25% | Aerospace fastener blanks and structural parts |
| TC11 | Annealed or heat-treated forged bar | ≥1030 MPa | ≥930 MPa | ≥8% | ≥20% | High-strength mechanical and elevated-temperature components |
Product Gallery
Frequently Asked Questions
Q: Are you trading company or manufacturer?
A: Manufacturer, also can do trading.
Q: How long is your delivery time?
A: Generally speaking, it is 10-15 days if the goods are in stock, or it is 30-40 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free charge but need pay the cost of freight.
Q: What is your terms of payment?
A: Payment ≤ 2000 USD, 100% in advance. Payment ≥ 2000 USD, 30% T/T in advance, balance before shipment. If you have another question, please feel free to contact with me.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
TORICH INTERNATIONAL LIMITED
Location
Suite 1604-3, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China
Contact Person
Richard SHEN