Chrome Plated Rod Specification

1. Material: CK45, SAE1045, 4140, 4340, JIS45C, 40Cr, 42CrMo
2. Diameter: Φ 6-500 mm
3. Length: max 16m
4. Chrome layer: 20 micron (min)
5. Hardness of the chrome layer: 800HV-1150HV
6. Roughness: Ra ≤0.2u
7. Straightness: ≤ 0.2/1000
8. Diameter tolerance: ISO f7
9. Roundness: the deviation of roundness is 50% of the diameter tolerance at the most.
10. Supply condition: Hard chrome plated/ Hardened and tempered/ Induction hardened
11. Packing: Anti rust oil to be spread on rod surface and each rod to be packed in paper roll and then in wooden case.

Packaging Details

1.Coated by antirust oil.
2.Sheathed by paper carton tube, both end covered by roundness paper carton.
3. Cotton rope twined and bundled without interspace, to avoid any surfaced scratched.
4. Plastic film covered overall of bundled bars, to keep seal.
5. (Options) Woven tarpaulin covered overall of bundled bars, to keep packing clear.
6. Lifting belts on the middle of bundled bars.
7. (Options) Wooden box packed.

We adopted the precision cold drawn, honing and polishing to manufacture the Precision Slender Shaft (Piston Rod), every technical target meets the national standard.

And our products are widely used in domestic hydraulic pneumatic, textile industry, print, plastic machine industry.

The Piston Pole

Rod diameter: Φ6-Φ300mm

Material quality: 45# 2Cr13

Supply status: cold-drawing, material adjustment

No surface treatment

surface Cr-plating or

Nickel-phosphorus plating