Condenser C70600S Torich Seamless Copper Tube
Torich C71500 C71640 Copper Condenser C70600S eamless Steel Tube
Standard Specification for Copper and Copper -Alloy Seamless Condenser Tubes and Ferrule Stock
Referenced Standards:
B153 Test method for expansion of copper and copper alloy pipe and tubing
B154 Test method for mercurous nitrate test for copper alloys
B170 Specification for oxygen-free electrolytic copper refinery shapes
B224 Classification of coppers
B846 Terminology for copper and copper alloys
B856 Test method for ammonia vapor test for determining susceptibility to stress corrosion cracking in copper alloys
Key words: Condenser tube, copper, copper alloys, evaporator, ferrule stock, heat exchanger,seamless tube,UNS No. C10100, UNS No. C10200, UNS No. C10300,UNS No. C10800,UNS No. C12000,UNS No. C12200,UNS No. C14200,UNS No. C19200,UNS No. C23000,UNS No. C28000,UNS No. C44300, UNS No. C44400,UNS No. C44500,UNS No. C60800
OD:5-420mm
WT:0.5-50mm
Length:Max12000mmm
Application: Condenser
Chemical Composition
| Steel Grade | Cu | Sn | Al | As | Ni | Fe | Mn | Pb | Zn |
| C70400 | Remain | - | - | - | 4.8-6.2 | 1.3-1.7 | 0.3-0.8 | 0.05 max | 1.0 max |
| C70600 | Remain | - | - | - | 9.0-11.0 | 1.0-1.8 | 1.0 max | 0.05 max | 1.0 max |
| C71500 | Remain | - | - | - | 29.0-33.0 | 0.4-1.0 | 1.0 max | 0.05 max | 1.0 max |
| C71640 | Remain | - | - | - | 29.0-32.0 | 1.7-2.3 | 1.5-2.5 | 0.05 max | 1.0 ma |
Mechanical Properties
| Steel Grade | Temper | Tensile Strength Mpa | Yeild Strength Mpa | Elongation % | Expansion Requirement % | Grain Size mm | ||
| Min | Min | Max | Min | Min | Min | Max | ||
| C70400 | 061 | 260 | 85 | - | - | 30 | 0.01 | 0.045 |
| H55 | 275 | 205 | - | - | 20 | - | - | |
| C70600 | 061 | 275 | 105 | - | - | 30 | 0.01 | 0.045 |
| H55 | 310 | 240 | - | - | 20 | - | - | |
| C71500 | 061 | 360 | 125 | - | - | 30 | 0.01 | 0.045 |
| HR50A | 495 | 345 | - | 12 | 20 | - | - | |
| HR50B | 495 | 345 | - | 15 | 20 | - | - | |
| C71640 | 061 | 435 | 170 | - | - | 30 | 0.01 | 0.045 |
| HR50 | 560 | 400 | - | - | 20 | - | - | |
Show:
QUALITY CONTROL:
1.Incoming Raw Material Inspection
2. Raw Material Segregation to avoid steel grade mix-up3. Heating and Hammering End for Cold Drawing
4. Cold Drawing and Cold Rolling, on line inspection
5. Heat Treatment, +A, +SRA, +LC, +N, Q+T
6. Straightening-Cutting to specified length-Finished Measuring Inspection
7. Machanical Testing in own labs with Tensile Strength, Yield Strength, Elongation, Hardness, Impact, Mictrostruture etc
8. Packing and Stocking
100% of our steel tubes are dimensionally checked
100% of our steel tubes are visually checked to assure they have a perfect surface condition and no surface defects.
100% eddy current test and ultrosonic test to eliminate longitudinal and transversal defects.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.