Water Cooled 43L Double Door Walk-In Chamber On - Site Installation
Water cooled 43L Double Door Walk-In Chamber need on-site installation
Applications
A KOMEG Walk-In Chamber serves as a test site for large components, assemblies, and finished
products in electrical and electronics, aerospace, batteries and automobiles, etc. KOMEG manufactures
both Static Walk-In Chambers and Dynamic Walk-In Chambers and can be configured as a temperature
chamber or a temperature humidity chamber.
The KMHW-Series walk-in temperature and climate test chambers are especially developed for large test
specimens. Size and design are optimal loading of test specimens. The modular construction and
variability in size and equipment is ideally for specific application.
.
Features
● GB-2423．1-2008 (IEC68-2-1) Test A: Low Temperature Test
● GB-2423．2-2008 (IEC68-2-2) Test B: High Temperature Test
● GJB360. 8-87(MIL-STD. 202F) High Temperature Life Test
● GBJl50. 3(MIL-STD-810D) High Temperature Test
● GJBl50. 4(MIL-STD-810D) Low Temperature Test
● GB2423. 3-93(IEC68-2-3)Test Ca: Constant Heat Test
● GB2423. 4-93(IEC68-2—30)Test Db: Damp Heat Alternative Test
● GJBl50. 9-93(MIL-STD-810D) Damp Heat Test
Specifications
| IV. Main Technical Parameters | ||
| 1. Temperature | ||
| 1.1Temperature range | +15℃～+40℃ | |
| 1.2 Temp. Deviation | ≦±2.0℃ | |
| 1.3Temp.Fluctuation | ≦±0.5℃ | |
| 1.4Temp. Uniformity | ≦2.0℃ | |
| 1.5 Heating time | From +15℃ to +40℃ 1℃/min no load | |
| 1.6 Cooling time | From +40℃ to +15℃ 0.7℃/min no load | |
| 2, Humidity | ||
| 2.1 Humidity range | 60%R.H～95%R.H | |
|
2.2 Temperature and humidity range |
||
| 2.3Humidity deviation |
±3.0％RH(＞75％RH) ±5.0％RH(≤75％RH) |
|
| 2.4Humidity Uniformity | ±3.0％RH( no load ) | |
| 2.5Humidity fluctuation | ±2.0％RH | |
| Temperature and humidity performance measurement comply with related regulation of IEC60068-3 standard; Sensors placed in the air outlet. | ||
| Ⅴ. Chamber Structure ( on-site installation ) | ||
| on-site installation , the chamber consists of three parts: Insulation chamber body, separate refrigerating unit and electric control cabinet. | ||
| 1. Chamber size |
Workspace volume : W 3000 × H 2400 × D 6000 mm Exterior size :aboutW 3550 × H 2700 × D 7350 mm ( not including the machine protruding part) |
|
| 2. Insulation box |
wall material: high-quality carbon steel with static color spray inner wall material: SUS304 # matte stainless steel plate Insulation material: 100mm rigid polyurethane foam insulation + glass fiber |
|
| 3. Door | Double Door W900*H1900mm with observation window. | |
| 4. Lighting device | 10 moisture-proof incandescent lamps. | |
| 6. Thread port | Diameterφ100mm *1 port on the left chamber with rubber isolation plug and plastic cover. | |
| 7. Shelf | No | |
| 8.Electric control box | Total power circuit breaker, over-temperature protection. | |
| 9.Pressure balance | The test chamber has a pressure balance port *1 to prevent the pressure in the chamber from being too high. | |
| 10.Control method | Forced circulation ventilation, Balanced thermostat conditioning (BTHC). | |
| 11. Heating | High-quality nickel-chromium alloy wire heater, non-contact control mode (SSR). | |
| 12. Humidifying | Stainless steel corrosion heat evaporative humidification. | |
| 13.Humidity Sensor | Electronic humidity sensor, no need to replace wet cloth. | |
| 14.Condensate outlet | Equipped with studio condensate and unit condensate drain holes. | |
| 15.Pure water machine | Pure water machine * 1, Please provide 1 ~ 2kg/cm2 tap water source. | |
Product details
Packaging:
Chambers are covered with air bubble film before put them into the strong plywoodcase, which not only
has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic,
odorless, moisture corrosion, crash-proof, etc
After-sales Service and Training
Charge-free warranty will last for 1 year from the date of equipment acceptance. After the warranty
period, the user will be charged properly. Irregular examination and life-long service are available;
Note: If needed, provide 2 operators for on-site installation and training
Company introduction:
Since 1990, manufacturers of custom environmental chambers and standard environmental chambers,
Specializing in environmental simulation equipment, ess, walk-in, environmental stress screening, altitude
chambers, temperature chambers, temperature and humidity chambers, environmental test chamber
manufacturers, humidity chambers, humidity simulation, temperature cycling, thermal test chambers, solar
panel test chambers, thermal shock, climatic/climate chambers, vibration test chambers, drive-in
chambers, laboratory test chambers, environment test rooms.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.