Energy Saving PSA Nitrogen Gas Generator / Nitrogen Generation Equipment
 

PSA Nitrogen Gas Generator Introduction

PSA Nitrogen Gas Generator produces N2 gas, using air as raw materials and carbon molecular sieve as adsorbent, by the selective adsorption of carbon molecular sieve to O2 and N2, achieving the separation of the N2 and O2 in the air.

PSA( Pressure Swing Adsorption) is an advanced gas separation technology, based on the physical adsorption of the internal surface in the adsorbent to gas molecules, separating the gas by the characteristics of absorbing to the quantity of different gas in general pressure. The CMS (Carbon Molecular Sieve) is a sorbent picked up from the air, used in separating Oxygen and Nitrogen molecular. The absorption quantity of CMS is greatly higher for Oxygen than Nitrogen under the same pressure.

 
The Nitrogen Generator uses two twowers of CMS to separate nitrogen from the compressed air, remove other gas like oxygen, CO2 etc , Typical feed air pressure is 110 psig/7.6 barg. Typical nitrogen product purity for SINCE GAS systems is 99.998%. Product flow rate for the same system will be higher with better nitrogen recovery if a higher oxygen content can be accepted in the nitrogen product. Systems are available with a product purity up to 99.999% nitrogen. Presently, our nitrogen generator purity range from 95%-99.9995%, flow 5Nm3/hr -5000 Nm3/hr
 
 
PSA Nitrogen Gas Generator Technical features :
 
Principle: passage of compressed air through a bed of carbon molecular sieve (CMS) using presure swing adsorption technology, the most reliable on the market

On-line monitoring instrument
Digital hours counter Audible and visual maintenance indicator
Economy mode option: via pressure to enables the compressor shut & start-up when nitrogen supply is not required
 
PSA Nitrogen Gas Generator Specifications :
 

 
 
Why Joshining-GAS?
-COST SAVINGS
You can save Nitrogen costs by generating your our nitrogen on-site, produce your own nitrogen , payback only couple of months .
Save on:
Transporation Costs
Bulk Liquid Evaporation Loss
Renting costs
Handling and Purchasing Costs
- Convenient
Produce your own nitrogen for production line , demand, to avoid transporation fault cause stop production line problems.