Customized Membrane Nitrogen Generator With Container Type 220V/50Hz​

Membrane Nitrogen Generator Introduction

PSA technology allows nitrogen molecules to be isolated from other molecules in compressed air (water, oxygen, CO2, etc). The carbon molecular sieve (CMS), the adsorbent in the generator, retains all those molecules and only lets the nitrogen pass through to the outlet. While the CMS in one vessel regenerates a second, connected vessel goes through the same adsorption cycle. These two connected vessels work together to ensure a near- continuous flow of nitrogen gas.

Membrane Nitrogen Generator Environment condition

1.installation place: ground grading, without foundation, but it is necessary to have a sewage discharge 

ditch.

2.The reserved area: about 200m2.

3.Ambient temperature: ≤40°C.

4.Relative humidity: ≤80%.

5.Power:440V/ 380V/220V,60/Hz/ 50Hz

Membrane Nitrogen Generator Specification:

Membrane Nitrogen Generator Details

Required air consumption

Item

Technical parameter

Remark

Flow rate

>1200m3/h

Pressure

>0.8Mpa

PSA Nitrogen Generator

Item

Technical parameter

Remark

Model

PM-1200

N2 output

1200Nm3/h

Standard state

N2 purity

≥95%

Non-oxygen content in GB

Pressure

0.8Mpa