0.3-0.8mm Trim Edge Track Roll Forming Machine 0.3 - 0.8mm 18 Stations

Price Negotiable

Price: negociate

MOQ: 1 set

Delivery Time: About 75 days

Brand: SUSSMAN

Product Description

J trim Roll Forming Machine 0.3-0.8mm America Hot Sale Trim Edge Making Machine

J, L and U Trim are metal trim accessories used to protect free edges of gypsum wallboards. Super Stud metal J, L and U-Trims is used at the termination of a gypsum board finished wall or ceiling. This may be at a door or window opening, at a transition to a different type of finish, or at any edge where a clean, straight, smooth edge is required.

The short leg of Super Stud J-Trim is hemmed for a safe, clean, smooth edge, and both legs are angled for a tight grip on gypsum or other sheathing. The long leg has a slight rib at its base to act as a screed for any finishes that are applied, and the outer edge of the long leg has a small bevel for a smooth tight fit.

J trim metal is used to cap the top edges of skirting, the top and sides of doors, the bottom and sides of windows, and in many cases the top of windows for aesthetics and continuity, also install soffit panels and hold them firmly in place, on inside corners and where the siding meets the soffit or roof at an angle.

1. Technical Parameter

Part details	Item Name	Specification
Material	Raw material	galvanized steel or aluminum
Material	Thickness	0.3-0.8 mm
Machine	Roller station	16-18 rollers
	Shaft diameter	60 mm
	Shaft material	45# steel with 0.05mm chrome
	Roller material hardness	50-55HRC
	Machine size	About 7.5×0.6×1.0 m
	Machine weight	About 6 tons
	Working speed	8-12 m/min
Cutter	Hardness	55- 62HRC
	Cutting tolerance	± 1 mm
	Material	Cr 12
	Operate	Hydraulic cutting
Power	Driving way	Chain
	Main power	5.5 kw servo
	Pump power	4 kw
	Voltage	380v/50HZ,3PHASE
Control system	PLC brand	Delta made in Twaiwan
	Screen	Touchable screen
	Language	Chinese and English or add language as customer need
Decoiler	Weight capicatity	3 tons
Receiving table	Operation	Manual
Receiving table	Length	4 m

2. Working Flow

Feeding with guide——Pre-punching——Roll forming——Cutting—Products collecting

3. Machine Components

3 tons passive decoiler	1 set
Feeding with guide	1 set
Hydraulic pre-punching device	1 set
Main roll forming machine	1 set
Hydraulic cutting	1 set
PLC control box	1 unit
Hydraulic station	1 unit
Passive out table	1 unit

4. Porifle design

5. J trim application

Metal J Trims is used at the termination of a gypsum board finished wall or ceiling. This may be at a door or window opening, at a transition to a different type of finish, or at any edge where a clean, straight, smooth edge is required.

4. Machine Photo