12″ 16″ 18″ Panel Coverage Vertical Standing Seam Metal Roofing Roll Forming Machine On Site
12″, 16″, And 18″ Panel Coverage Vertical Standing Seam Metal Roofing Roll Forming Machine On Site
The KR-18 sheet is a sheet rolled and jointed on site,it is east to take and operate on site.
1. Technical Parameter
- Material Thickness:0.4-0.8mm color coated steel
- Forming Speed:8-12m/min
- Roller stands:About 11 rollers
- Roller Material: 45# steel, coated with chrome, fire treated
- Shaft diameter and materail:Ф75, 45# steel
- Cutting type: hydraulic cutting
- Power device:Petrol engine
- Material of cutting:Cr12 Mov steel
- Main machine weight: About 2.5 Tons
- Machine size: About 4.8*1.0*1.2m
- Transmission Type: chain drive
2. Standing Seam Profile Drawing
- Architectural / structural integral standing seam panel
- 12″, 16″, and 18″ panel coverage, 1-3/4″ rib height
- Gauges: 26ga and 24ga standard, 22ga optional
- Snap together panel system, minimum roof slope: 3:12
- Factory applied side lap sealant
- Concealed clip designed for thermal movement
- Accommodates up to 4″ blanket insulation
- Applies over open framing or solid substrate
4. Application
5. Packaging & Shipping
Before loading to the container, we will check the machine first
Second, make some protection on the machine, Such as, we will mpaint the coil on the roller and shaft, in case the roller and shast got corrosion and rusty during long time delivery
Third, we will make the plastic package on the easy damage parts, and fix all the parts into container by the steel wire rope, and ensure the machine will not damage when shaking on sea.
At last, we will take photos for customer when loading to container.
6. Machine photo
6. Recommend products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.