45mm PTFE Banded Piston No Burrs Used In Car Shock Absorbers
46 mm PTFE Banded Piston With HRB65 - 90 No Burrs Used In Car Shock Absorbers
Groovefill requirement for banded piston
The minimum groovefill requirement is valid for the average measurement / groove on both sides
of the piston (0° and 180° on the circumference of the piston)
| BORE SIZE | GROOVE FILL |
| 27 MM | MIN 0,24 MM |
| 30 MM | MIN 0,24 MM |
| 32 MM | MIN 0,30 MM |
| 35 MM | MIN 0,34 MM |
Specifications:
|
Physical performance for shock piston |
tensile strength |
More than 15MPa |
|
elongation @ break |
More than 200% |
|
|
shore hardness (bands) |
57 - 61 |
|
|
density |
2.15 – 2.19 g/cm3 |
|
|
wear |
Less than 50mg |
|
|
friction coefficient |
Less than 0.3 |
|
|
hardness (sinter piston) |
HRB65-85 |
|
|
Different fillers |
carbon fiber |
|
|
glass fiber |
||
|
graphite |
||
|
Molybdenum disulfide |
||
|
carbon |
||
Description:
New design new technology ptfe + Carbon Fiber Shock Absorber Piston with durability test
1. Size D45* D12 * 12.5
2. PTFE+CARBON FIBER
3. Band PTFE disc
4. 2021 new design
5. Density of sinter piston: 6.8g/cm3
6. Material: C=0.3%, Cu=3%
7. Hardness for sinter piston is HRB65-85
Materials of PTFE disc:
1. PTFE+BRONZE
2. PTFE+CARBON FIBER
3. PTFE+GLASS FIBER
4. OTHER FILLERS or other material according to customer’s demand
Applications:
In car or motorbike front or rear shock absorbers
Competitive Advantage:
1. Consistency in size.
2. Infrared ray detect the out diameter in automatic banding machines
3. Produce PTFE disc by Xia Yi, can control the quality itself.
Picture show:
 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.