24 Fibers MPO OM3 Fiber Optic Loopback Module for 40/100G Network Testing
Price:
Negotiable
MOQ:
50pcs
Delivery Time:
Normally 25 days after received the deposit.
Brand:
HELLOSIGNAL® OR OEM
Product Description
24 Fibers MPO OM3 Fiber Optic Loopback Module/Cable
High-performance MPO OM3 fiber optic loopback module designed for testing and verification of network equipment in 40G/100G data center environments.
Zion Product Information
Zion Code: ZCM1116HXA1
Zion Description: 8F MPO OM3 Fiber Optic Loopback Module/Cable
Zion Description: 8F MPO OM3 Fiber Optic Loopback Module/Cable
Product Overview
The MPO loopback contains MPO back ring jumping lines in the LOOPBACK configuration, connecting both ends of the fiber into an MPO connector to create a complete light path within the same connector. This enables comprehensive testing of device launch capacity and receiving sensitivity, particularly in 40/100G network communications. By returning signals to the source, these loopbacks effectively identify and locate various network phenomena for thorough testing and evaluation of fiber network components and interfaces.
Configuration Options
Available in multiple optical fiber configurations to accommodate 8-core, 12-core, and 24-core MPO connectors, adapting to various test port requirements:
- 8F MPO Fiber Loopback Module: Verifies and tests transceivers with MPO interface - 40GBASE-SR4/CSR4 QSFP+ devices
- 12F MPO Fiber Loopback Module: Verifies and tests transceivers with MPO interface - 40GBASE-SR4 QSFP+ or 100GBASE-SR4 devices
- 24F MPO Fiber Loopback Module: Verifies and tests transceivers with MPO interface - 100GBASE-SR10 CXP/CFP devices
Testing Applications
MPO Loopback modules provide looped signals to test transmit and receiving functions, widely used within testing environments especially for parallel optics 40G and 100G networks. These loopbacks are engineered to link Transceivers (TX) and Receivers (RX) positions of MPO transceiver interfaces. They facilitate and accelerate IL testing of optical network segments by connecting to MPO trunks and patch leads.
Connector Standards
MPO Singlemode Reference: IEC 61754-7
MPO Singlemode Housing Details: SM APC: Green connectors+black boot (Standard Loss MPO); SM APC: Yellow connectors+black boot (Super low loss MPO)
MPO Multimode Reference: IEC 61754-7
MPO Multimode Housing Details: OM1&OM2 PC: Beige connectors+black boot (Standard Loss MPO); OM3&OM4 PC: Aqua connectors+black boot (Standard&Super low loss MPO); OM3&OM4 PC: Heather Violet connectors+black boot (Standard loss MPO)
MPO Singlemode Housing Details: SM APC: Green connectors+black boot (Standard Loss MPO); SM APC: Yellow connectors+black boot (Super low loss MPO)
MPO Multimode Reference: IEC 61754-7
MPO Multimode Housing Details: OM1&OM2 PC: Beige connectors+black boot (Standard Loss MPO); OM3&OM4 PC: Aqua connectors+black boot (Standard&Super low loss MPO); OM3&OM4 PC: Heather Violet connectors+black boot (Standard loss MPO)
- Meets IEC Standard IEC-61754-7; IEC61755, Telcordia GR-1435-CORE, JIS C5982; TIA-604-5(FOCIS5) compliant Structured cabling per TIA-568-C
- 10G Fiber Channel Compliant
- 40G and 100G IEEE 802.3 compliant
Optical Specifications
| Parameter | Specification |
|---|---|
| Fiber Type | Multimode |
| Fiber Diameter | 50/125um, 62.5/125um |
| Insertion Loss | MM＜1.0dB |
| Return Loss | MM＞25dB |
| Insert-pull Test | 500 times, IL＜0.5dB |
| Operation Temperature | -40℃~ +80℃ |
Fiber Optic Loopback Testing
A loopback test involves sending a signal from a communication device and looping it back to verify proper functionality and troubleshoot defective network nodes. Optical loopbacks specifically verify the operational reliability of fiber optic devices by looping the emitted signal from the transmit (Tx) end back to the receive (Rx) end of the same component using fiber optic loopback cables or modules.
Applications
12F MPO-LC/SC/FC/ST Straight harness Cables are designed for 40G LR4 PSM, 40GBASE-SR4, 40G QSFP+ PLR4 and high-density data center applications. Optimized for 10/40/100G high-density data center environments, these assemblies utilize MPO Connectors from Senko/Nissin/Sumitomo and serve three primary application areas:
- Data Center applications with high-density environments
- Fiber to the building installations
- Internal connector applications in fiber equipment
Naming Rules & Order Confirmation
Connector and Fiber Channel
Polarity (Channel Alignment)
Transceiver Selection Guide
When selecting a loopback for specific transceiver modules, consider connector type, polish type, and cable type compatibility. The following tables provide selection guidance for commonly used transceiver modules:
For transceiver modules not specifically mentioned, suitable loopback selection can be determined by analyzing interface type, physical contact requirements, and cable type specifications.
Zion Communication MPO Fiber Optic Loopback Products
- 7236013 ZCM1111HXA: 8F MPO SM Fiber Optic Loopback Module/Cable
- 7236014 ZCM1121HXA: 12F MPO SM Fiber Optic Loopback Module/Cable
- 7236015 ZCM1141HXA: 24F MPO SM Fiber Optic Loopback Module/Cable
- 7236016 ZCM1116HXA: 8F MPO OM3 Fiber Optic Loopback Module/Cable
- 7236017 ZCM1126HXA: 12F MPO OM3 Fiber Optic Loopback Module/Cable
- 7236018 ZCM1146HXA: 24F MPO OM3 Fiber Optic Loopback Module/Cable
- 7236019 ZCM1117HXA: 8F MPO OM4 Fiber Optic Loopback Module/Cable
- 7236020 ZCM1127HXA: 12F MPO OM4 Fiber Optic Loopback Module/Cable
- 723602: ZCM1147HXA: 24F MPO OM4 Fiber Optic Loopback Module/Cable
- 7236022 ZCM2111HXA: 8F MTP SM Fiber Optic Loopback Module/Cable
- 7236023 ZCM2121HXA: 12F MTP SM Fiber Optic Loopback Module/Cable
- 7236024 ZCM2141HXA: 24F MTP SM Fiber Optic Loopback Module/Cable
- 7236025 ZCM2116HXA: 8F MTP OM3 Fiber Optic Loopback Module/Cable
- 7236026 ZCM2126HXA: 12F MTP OM3 Fiber Optic Loopback Module/Cable
- 7236027 ZCM2146HXA: 24F MTP OM3 Fiber Optic Loopback Module/Cable
- 7236028 ZCM2117HXA: 8F MTP OM4 Fiber Optic Loopback Module/Cable
- 7236029 ZCM2127HXA: 12F MTP OM4 Fiber Optic Loopback Module/Cable
- 7236030 ZCM2147HXA: 24F MTP OM4 Fiber Optic Loopback Module/Cable
Packaging
These fiber optic cables are packaged in easily handled, well-protected packaging labeled and marked by OMC as standard. Available carton sizes: 34*22*15 cm; 44*34*24 cm; 54*39*34 cm. Carton selection depends on order quantity. Custom packaging options available.
OEM/ODM Services
Customization options include:
- Cable color, printing text, cable jacket material, connector color
- OEM Label, Identification rings, cable labels, boxes, shipping marks
- Different quality levels to meet specific requirements
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
HANGZHOU ZION COMMUNICATION CO., LTD
Location
NO.68,HUAQIAO ROAD, LIN'AN, HANGZHOU, ZHEJIANG, CHINA
Contact Person
James