50Hz 100kW Biomass Gasification Natural Gas Generators with 1500RPM Speed

50Hz 100kW Biomass Gasification Power Generation with Germany Man Engine

Specifications
1. 100kW Biomass Gasification Power Generation
2. Prime power is 100kW/125kVA
3. 50Hz,1500RPM.
4, silent canopy with options
 

100kW Biomass Gasification Power Generation

Performance Feature

♦ Engine and alternator shall be mounted on a same frame steel skid.
♦ Built-in damper for anti-vibration.
♦ Small size, low weight, easy for operation, installation and maintenance.
♦ World most famous brand diesel engine.
CUMMINS, uk engine, VOLVO PENTA, DOOSAN, DEUTZ, LOVOL, WUXI POWER, GOOGOL, CSR.
♦ World famous brand AC alternator: Stamford, Marathon, Leroy Somer, MVC.
♦ Advanced and reliable controller: Key start, Auto start, AMF & Remote control by PC with RS232 / 485.
♦ Full range protect function and alarm shutdown feature.
♦ Comply with GB/T2820-97, ISO8528 national standard and ISO9001 quality standard.


Alternator Feature

♦ Brushless, 4 poles, rotation magnet.
♦ IP21-23 enclosure is standard for all industrial alternators.
♦ The insulation system is Class H.
♦ Simple installation and maintenance, with easy access to terminals, rotating diodes and coupling bolts.
♦ Wide range of flange adaptors and single bearing disc coupling.
♦ Standard 2/3 pitch windings avoid excessive neutral currents.
♦ Optional accessories available for easy paralleling with mains or other generators.
♦ Optional permanent magnet generator ( PMG ) system provide constant excitation under all condition.
♦ AVR auto voltage regulator, auto exciter, auto adjustment.
♦ Standard: BS5000, VDE0530, NEMA MG1-32, IEC34, IEC60034, AS1359.


Control System

GCS6410 is an Automatic Mains Failure module which is designed to monitor the mains utility and on failure automatically starts the generator and transfers the load. On return of the mains utility the controller automatically returns the load to the mains and stops the generator after a cool down period.

The module also monitors and protects the engine, indicating operational status, fault conditions and metering on the front panel LCD or LED's.

♦ Ture RMS measuring
♦ Configuration of parameters by front panel push buttons or communication software
♦ RS485, RS232, or USB port for remote communication.
♦ Configurable fuel output energise to stop or energise to run.
♦ 6 configurable inputs.
♦ 3 configurable outputs.
♦ 2 analogue inputs configurable for different senders for oil pressure and engine temperature.
♦ With ATS control.