Four Stroke 120kw Soundproof Gas Power Generator with Brushless Natural Aspirated
Four Stroke 120kw Soundproof Gas Power Generator with Brushless Natural Aspirated
General reqirements of gas power generator:
1.Biogas inlet pressure is 80mm-200mm,is 0.8kpa-2kpa.
2.The products is apply to biogas(calorific value≥5000kcal).Biogas is the standard fuel based on the power,the power will decrease while the calorific is low.Hydrogen <8%,carbon dioxide <28%,tar <0.1%,hydroge sulfide <3%.
3.Genset configuration:Biogas generator,single bearing alternator,mixer,ignition system(ECU,spark plug,high pressure lines,ignition switch,lines),electrical speed regulator,fans,water tank,air filter,voltage regulator,power supply,battery and spare parts.
Specification of genset
| Genset model | LR120GFQ | |||||||
| Genset power | 120KW | |||||||
| Rated voltage | 400/230V | |||||||
| Genset current | 216A | |||||||
| Rated frequency | 50Hz | |||||||
| Rated speed(r/min) | 1500 | |||||||
| Power factor | 0.8 | |||||||
| Dimensions(mm)(L×W×H) | 2650×1100×1900 | |||||||
| Genset weight(kg) | 2600 | |||||||
Specification of diesel engine
| Number of Cylinders | 6 | |||||||
| Cycle | Four Stroke | |||||||
| Aspiration | Natural aspirated | |||||||
| Fuel System | Biogas | |||||||
| Bore×Stroke(mm×mm) | 140×160 | |||||||
| Displacement(Liter) | 14.78 | |||||||
| Compression Ratio | 11.5:1 | |||||||
| Speed Governor | Electrical | |||||||
| Starting Method | DC24V electrical starting | |||||||
| Cooling System | Forced water cooling cycle | |||||||
| Gas Consumption(m/kw.h) | biogas<0.6 | |||||||
Specification of alternation
| Alternator brand | Laurel | |||||||
| Alternator model | LA6140Q | |||||||
| Number of Phase | 3 | |||||||
| Connecting Type | 3 Phase 4 Wires | |||||||
| Number of Bearing | 1 | |||||||
| Protection Grade | IP23 | |||||||
| Altitude | ≤1000m | |||||||
| Exciter Type | Brushless,Self-exciting,AVR Automatic Voltage Regulating,100% Copper winding wire | |||||||
| Insulation Class | H | |||||||
| Voltage Regulatioin,Steady State | ≥±6% | |||||||
| Transient State Voltage | ±1.0% | |||||||
Specification of control panel
1.Biogas inlet pressure is 80mm-200mm,is 0.8kpa-2kpa.
2.The products is apply to biogas(calorific value≥5000kcal).Biogas is the standard fuel based on the power,the power will decrease while the calorific is low.Hydrogen <8%,carbon dioxide <28%,tar <0.1%,hydroge sulfide <3%.
3.Genset configuration:Biogas generator,single bearing alternator,mixer,ignition system(ECU,spark plug,high pressure lines,ignition switch,lines),electrical speed regulator,fans,water tank,air filter,voltage regulator,power supply,battery and spare parts.
Warranty
Warranty is according to our standard conditions:12 months or 1,000 running hours, subject to the earlier one (artificial damage to be an exception).
Service
1. Before-sale Service:
We provide detailed product technical parameters for equipment choosing and system designing.
2. Service quality assurance:
Our sale staffs are all experience and professional,we can provide the most proper system design and optimized equipment for the customers.
3. After sale maintenance service:
We create files for end user and provide them follow-up service,regular return visit and permanent maintenance.
distributors all over World that support after sale service.
4. Spare parts supply:
We provide all kinds of spare parts and technical support.
5. Main overhaul or maintenance service:
We provide perennial major overhaul and maintenance service.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.