AVR Brushless 10kw Wood Gas Generator Automatic Control Low Noise with Wood Pellet
AVR Brushless 10kw Wood Gas Generator Automatic Control Low Noise with Wood Pellet
The advantages of Wood Gas power plant
Adopt computer optimized parts specially used for gas engine:
1) Alloy air valves & seat rings, pistons with heat & wear-resisting coating, specially designed combustion chamber, more durable, ensure the sufficient burn & engine power.
2) Gas & air mixed out of the cylinder, mix better and burn sufficiently
3) Integrated control technology, adjust the gas intake quantity automatically according to the load variation.
4) Ignition coils/cables/ECU from Weichai Group, Bosch electronic throttle & sparkplugs , USA Impco gas & air mixer.
5) Industrial class fire blocker, the fire or explosion accident will never happen.
6) Italy Madas gas pressure reducer, ensure steady gas pressure .
7) CHP boiler available.
Technical Parameter:
| Model | LR10GFT-J | |
| Structure | integral | |
| Exciting method | AVR Brushless | |
| Rated Power (kW) | 10 | |
| Rated Current(A) | 18 | |
| Rated Voltage(V) | 400/230, 3 phase | |
| Rated Frequency(Hz) | 50/60 | |
| Rated Power Factor | 0.8 LAG | |
| Overall dimension (L x W x H)(mm) | 1650x720x1250 | |
| Net weight (kg) | 680 | |
| Gas Engine | Model | NQ25D1.5 |
| Type | In line, 4 stroke, electric control ignition, natural aspiration, water cooled | |
| Cylinder number | 4 | |
| Bore x Stroke (mm) | 90x100 | |
| Total displacement (L) | 2.54 | |
| Rated Power (kW) | 15 | |
| Rated Speed (r/min) | 1500/1800 | |
| Fuel Type | wood gas | |
| Control panel | NPT Brand | LCD display |
| Control module | HGM7320 or 9510 | |
| Operation language | English | |
| Alternator | Model | XN164C |
| Brand | MBH( Germany) | |
| Shaft | Single bearing | |
| Rated Power (kW) | 10.8 | |
| Enclosure protection | IP23 | |
| Efficiency (%) | 80.7 | |
Gas Required:
1) Gas Pressure range: 0.8-30Kpa (8kw-200kw), 50-200Kpa (250kw-1000kw).
2) Wood gas: Heat Value>2000KCAL, Tar<20mg/cbm, H2<5%,H2S<100ppm, Impurities<5um, No water.
The power output will be reduced if heat value going down.
Automatic Control Digital system of 10kw wood gas generator:
1) Adopt Genset controller with LCD display, taking microprocessor as the core.
2) The monitor and display on the voltage, current, frequency, active power, apparent power, power factor of the generate
electricity /grid electricity.
3) The monitor and display on the genset’s water temperature, oil pressure, rotational speed, battery voltage, running hours,
accumulative total power and number of starts.
4) Protection alarm and fault automatic storage on high water temperature, low oil pressure, double speeding, over current,
over voltage, over frequency and phase failure etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.