Button Snap Pull Tensile Textile Testing Instruments For Button Safety Testing

HTP-005 Button Pull Test Machine

Detailed Description:

The button snap pull tester. To determine the holding or breaking strength of prong-ring attached snap fasteners onto garments. Consists of an Upper Snap Clamp, a Lower Fabric Clamp & Force Gauge mounted on a Stand. The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By turning the Top Flywheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded.

Application:

Used for measuring the responsibility of garment manufacturer to ensure

button and firmware can be fixed on the ready-made garments properly,

Avoiding button drop from garment to brought danger to baby swallow.

Used for testing the vertical orientation tension of button and added touch.

Specification:

Dimensions : 280 x 230 x 735 mm (L×W×H)
G.W:30kg

Standards:

ASTM WK4510 PS79-96,ASTM F963,EN71-Part1,M&S P115A(for snap) P115(for button)

16 CFR 1500.51-53,